Home
Product Catalog
Inspection Report
Reference List
Standard Specification
Stainless Tube
Pipe Stock List
Certificates
Contact Us

Standard Specification 

API(American Petroleum Institute)
 
 
API Spec 2B Structural Steel Pipe – Steel Pipe
API Spec 2C Offshore Cranes – Offshore Cranes
API Spec 2F Mooring Chain - Flash Welded Chain; Forged Connecting Links
API Spec 2H Carbon Manganese Steel Plate for Offshore Platform Tubular Joints – Grade 42 Steel Plate; Grade 50 Steel Plate
API Spec 2MT1 As-Rolled Carbon Manganese Steel Plate with Improved Toughness for Offshore Structures – Steel Plate, Grade 2MT1
API Spec 2MT2 Rolled Shapes with Improved Notch Toughness - Steel Rolled Shapes
API Spec 2W Steel Plates for Offshore Structures Produced by Thermo-Mechanical Control Processing (TMCP) – Grade 50 Steel Plate; Grade 60 Steel Plate
API Spec 2Y Steel Plates, Quenched-and-Tempered, for Offshore Structures – Grade 50 Steel Plate; Grade 60 Steel Plate
API Spec 4F Drilling and Well Servicing Structures – Derricks; Masts; Crown Block Assemblies; Substructures; at PSL 1 and 2
API Spec 5B Threading, Gauging, and Thread Inspection of Casing, Tubing and Line Pipe Threads – Thread Gages
API Spec 5CT Casing and Tubing – Manufacturer of Casing or Tubing Plain End; Manufacturer of Casing or Tubing Threaded and Coupled; Manufacturer of Casing or Tubing Pup Joints; Manufacturer of Casing or Tubing Couplings; Manufacturer of Accessories; Processor of Casing or Tubing Plain End; Processor of Casing or Tubing Threaded and Coupled; Threader at Groups 1, 2, 3 and 4.
API Spec 5DP Drill Pipe - Drill Pipe Body; Tool Joints; Drill Pipe (Assembly)
API Spec 5L Line Pipe – Manufacturer of Line Pipe - Plain End at PSL 1; Manufacturer of Line Pipe - Plain End at PSL 2; Manufacturer of Line Pipe - Threaded and Coupled; Manufacturer of Line Pipe Couplings; Processor of Line Pipe - Plain End at PSL 1; Processor of Line Pipe - Plain End at PSL 2; Processor of Line Pipe - Threaded and Coupled; Threader.
API Spec 5LC CRA Line Pipe – Manufacturer of Alloy Pipe; Processor of Alloy Pipe
API Spec 5LCP Coiled Line Pipe – Coiled Line Pipe
API Spec 5LD CRA Clad or Lined Steel Pipe – Manufacturer of Clad Steel Pipe; Manufacturer of Lined Steel Pipe; Processor of Clad Steel Pipe; Processor of Lined Steel Pipe.
API Spec 5ST Coiled Tubing - Manufacturer of Coiled Tubing
API Spec 6A Wellhead and Christmas Tree Equipment – Manufacture of: Casing and Tubing Heads; Cross-Over Connectors; Tubing Head Adapters; Top Connectors; Tees and Crosses; Fluid-Sampling Devices; Adapter and Spacer Spools; Casing and Tubing Hangers; Valves; Chokes; Surface and Underwater Safety Valves; Surface and Underwater Safety Valve Actuators; Back Pressure Valves; Flanged Connectors; Threaded Connectors; Other End Connectors; Bullplugs; Valve Removal Plugs; Actuators; Ring Joint Gaskets at PSL 1 through 4
API Spec 6AV1 Verification Test of Wellhead Surface Safety Valves and Underwater Safety Valves for Offshore Use – Testing Agency
API Spec 6D Pipeline Valves (Steel Gate, Plug, Ball, and Check Valves) – Gate Valves; Plug Valves; Ball Valves; Check Valves
API Spec 6DSS Subsea Pipeline Valves - Subsea Gate Valves; Subsea Plug Valves; Subsea Ball Valves; Subsea Check Valves
API Spec 6H End Closures, Connectors and Swivels – Pipeline Closures; Connectors; Couplings; Misalignment Devices (Swivels); Split Mechanical Fittings
API Spec 7-1 Rotary Drilling Equipment - Kelly Valves; Kellys; Drill Stem Subs; Drill Collars; Heavy Weight Drill Pipe; Roller Bits; Blade Drag Bits; Diamond Bits; PDC Bits; Threading for Rotary Shouldered Connections
API Spec 7-2 Threading and Gauging of Rotary Shouldered Thread Connections - Rotary Shouldered Connection Gauges
API Spec 7B-11C Internal-Combustion Reciprocating Engines for Oil Field Service
API Spec 7F Oil Field Chain and Sprockets – Roller Chain
API Spec 7K Drilling Equipment – Rotary Tables, Kelly Bushings, Master Bushings, Rotary Slips, Rotary Hoses, Slush Pump Components, Drawworks Components, Spiders Not Capable of Use as Elevators, Manual Tongs, Safety Clamps Not used as Hoisting Devices, Power Tongs
API Spec 7NRV Drill String Non-return Valves - Drill String Non Return Valves, Non Return Valve Subs, Non Return Valve Landing Nipples, Non Return Valve Equalizing Heads
API Spec 8A Drilling and Production Hoisting Equipment – Hoisting Sheaves, Traveling Blocks; Block-to-Hook Adapters, Connectors and Link Adapters, Drilling Hooks, Tubing and Sucker Rod Hooks; Elevator Links, Casing, Tubing and Drill Pipe Elevators, Spiders, Sucker Rod Elevators; Rotary Swivel Bail Adapters, Rotary Swivels; Deadline Tie-Downs; Heave Compensators; Kelly Spinners, When Used as Tension Member; Tension Members of Sub-Sea Handling Equipment
API Spec 8C Drilling and Production Hoisting Equipment – Hoisting Sheaves, Traveling Blocks and Hook Blocks; Block-to-Hook Adapters, Connectors and Link Adapters, Drilling Hooks, Tubing and Sucker Rod Hooks; Elevator Links, Casing, Tubing and Drill Pipe Elevators, Spiders (when capable of being used as elevators), Sucker Rod Elevators; Rotary Swivel Bail Adapters, Rotary Swivels; Power Swivels, Power Subs; Wireline Anchors; Heave Compensators; Kelly Spinners (when capable of being used as hoisting equipment); Pressure Vessels and Piping Mounted onto Hoisting Equipment at PSL 1 and 2
API Spec 9A Wire Rope – Bright or Drawn-Galvanized Wire Rope; Mooring Wire Rope; Torpedo Lines; Well-Measuring Wire; Well-Measuring Strand; Wire Guy Strand; Structural Rope and Strand
API Spec 10A Well Cements – API Well Cement Class A, Type [O]; Class B, Type [MSR, HSR]; Class C, Type [O, MSR, HSR]; Class D, Type [MSR, HSR]; Class E, Type [MSR, HSR]; Class F, Type [MSR, HSR]; Class G, Type [MSR, HSR]; Glass H, Type [MSR, HSR]
API Spec 10D Bow-Spring Casing Centralizers – Casing Centralizers
API Spec 11AX Subsurface Sucker Rods, Pumps and Fittings – Pump and Pump Parts; Pump and Pump Parts without Tubing or Sucker Rod Threads; Seating Cups
API Spec 11B Sucker Rods – Steel Sucker Rods; FRP Sucker Rods; Couplings, Subcouplings and Polished Rod Connections; Polished Rods; Polished Rod Clamps; Stuffing Box and Pumping Tees; Sinker Bars; Threads; Thread Gages
API Spec 11D1 Downhole Equipment - Packers; Bridge Plugs
API Spec 11E Pumping Units – Pumping Unit Structure; Pumping Unit Gear Reducer
API Spec 11IW Independent Wellhead Equipment – Independent Wellheads; Top Connectors; Tubing and Casing Slip Hangers; Tubing and Casing Mandrel Hangers; Packoffs; Belled Nipples; Connector Flanges; Stripper Adapters
API Spec 11V1 Gas Lift Valves, Orifices, Reverse Flow Valves and Dummy Valves – Gas Lift Valves; Reverse Flow (Check) Valves; Orifice Valves; Dummy Valves; Wireline Retrievable Valve Mandrels
API Spec 12B Bolted Tanks for Storage of Production Liquids – Storage Tanks
API Spec 12D Field Welded Tanks for Storage of Production Liquids – Storage Tanks
API Spec 12F Shop Welded Tanks for Storage and Production Liquids – Storage Tanks
API Spec 12J Oil and Gas Separators – Separators
API Spec 12K Indirect Type Oilfield Heaters – Heaters; Shells; Coils
API Spec 12L Vertical and Horizontal Emulsion Treaters – Treaters
API Spec 12P Fiberglass Reinforced Plastic Tanks – FRP Tanks
API Spec 13A Oil-Well Drilling-Fluid Materials – Barite; Barite 4,1 Hematite; Bentonite; Nontreated Bentonite; Attapulgite; Sepiolite; CMC-LVT; CMC-HVT; Starch; OCMA Grade Bentonite; PAC-LV; PAC-HV; Drilling-Grade Xanthan Gum
API Spec 14A Subsurface Safety Valve Equipment – Subsurface Safety Valves; Testing Agency
API Spec 14L Lock Mandrels and Landing Nipples - Lock Mandrels; Landing Nipples
API Spec 15HR High Pressure Fiberglass Line Pipe – Line Pipe; Couplings; Fittings; Flanges; Reducers and Adapters
API Spec 15LE Polyethylene Line Pipe (PE) – (PE) Line Pipe
API Spec 15LR Low Pressure Fiberglass Line Pipe – CC Line Pipe; FW Line Pipe
API Spec 16A Drill Through Equipment - Ram BOP; Ram Blocks, Packers, and/or Top Seals; Annular BOP; Annular Packing Units; Hydraulic Connectors; Drilling Spools; Adapters; Loose Connections; Clamps
API Spec 16C Choke and Kill Systems – Actuated Valve Control Lines; Articulated Choke & Kill Line; Drilling Choke Actuators; Drilling Choke Control Line exclusive of BOP Control Lines and Subsurface Safety Valve Control Lines; Drilling Choke Controls; Drilling Chokes; Flexible Choke and Kill Lines; Union Connections; Rigid Choke and Kill Lines; Swivel Joints; Choke and Kill Manifold Assemblies
API Spec 16D Control Systems for Drilling Well Control Equipment – Control Systems for Surface Mounted BOP Stacks; Hydraulic Control Systems for Subsea BOP Stacks; Electro-Hydraulic/Multiplex Control Systems for Subsea BOP Stacks; Diverter Control Systems; Emergency Backup BOP Control Systems; Auxiliary Equipment Control Systems and Interfaces
API Spec 16F Marine Drilling Riser Equipment
API Spec 16RCD Drill through Equipment (Rotating Control Devices)
API Spec 16R Marine Drilling Riser Couplings – Marine Drilling Riser Couplings
API Spec 17D Subsea Wellhead and Christmas Tree Equipment – Subsea Tree Equipment, Subsea Wellhead Equipment, Mudline Suspension System Equipment, Other Equipment at PSL 2, 3
API Spec 17E Subsea Production Control Umbilicals – Hose Umbilicals; Electrical Umbilicals; Electro-Hydraulic Umbilicals
API Spec 17F Subsea Production Control Systems - Subsea Production Control Systems
API Spec 17J Unbonded Flexible Pipe – Unbonded Flexible Pipe
API Spec 17K Bonded Flexible Pipe - Bonded Flexible Pipe
API Standard 547 General-Purpose Form-Wound Squirrel Cage Induction Motors - 250 Horsepower and Larger
API Standard 594 Check Valves
API Standard 599 Metal Plug Valves
API Standard 600 Bolted Bonnet Steel Gate Valves - Bolted Bonnet Steel Gate Valves
API Standard 602 Compact Steel Gate Valves, Globe Valves and Check Valves
API Standard 603 Corrosion-Resistant Bolted Bonnet Gate Valves
API Standard 608 Metal Ball Valves
API Standard 609 Butterfly Valves
API Standard 650 Welded Tanks for Oil Storage - Steel Plates and Shop Built Tanks
 


BS(British Standards)
BS534 / Steel Pepes Fittings and Specials for Water and Gas and Sewage

BS778 / Steel Pipes and Joints for Hydraulic Purposes

BS879 / Steel Pipes and Joints for Hydraulic Purposes

   (HFS27/HFS35/ERW27/ERW26/HFS27/HFS35/ERW27/ERW26)

BS1139 / Tubes for Use in Scaffolding

BS1387 / Steel Tubes and Tubulars Suitable for Screwing to BS21 Pipe Threads

   (DN15/DN20/DN25/DN32/DN40/DN50/DN65/DN80/DN100/DN125/DN150/DN15/DN20/DN25/DN32/DN40)

BS1717 / Steel Tubes for Cycle and Motor Cycle Purposes

   (CFSC3/CFSC4/CFSC6/ERWC1/ERWC2/ERWC3/ERWC5/CRWC1/CRWC2/CRWC3/CFSC3/C4)

BS1864 / Stainless Steel Milk Pipes and Fittings

   (Gr.1/Gr.2/Gr.3/Gr.4/Gr.5/Gr.6/Gr.7/Gr.8/Gr.9/Gr.1/Gr.2/Gr.3/Gr.4/Gr.5/Gr.6/Gr.7/Gr.8/Gr.9)

BS3059 PART1 / Steel Boiler and Superheater Tubes

   (HFS320/CFS320/ERW320/CEW320/HFS320/CFS320/ERW320/CEW320)

BS3059 PART2 / Steel Boiler and Superheater Tubes

   (S1 360/S2 360/ERW360/CEW360/S1440/S2 440/ERW440/CEW440/S1 243/S2 243/ERW243/CEW243/ERW620)

BS3600 / Dimensions and Masses Per Unit Length of Welded and Seamless Steel Pipes

and for Pressure Purposes

BS3601 / Steel Pipes and Tubes for Pressure Purposes Carbon Steel with Specified Room

Temperature Properties   (BW320/ERW320/ERW360/ERW430/S360/S430/SAW430/BW320/ERW320)

BS3602 PART1 / Steel Pipes and Tubes for Pressure Purposes : Carbon and Carbon Manganese

Steel with Specified Elevated Temperature Properties   (HGS360/CFS360/CEW360/HFS430/CFS430/)

BS3602 PART2 / Steel Pipes and Tubes for Pressure Purposes : Carbon and Carbon Manganese

Steel with Specified Elevated Temperature Properties   (SAW410/SAW460/SAW410/SAW460)

BS3603 / Steel Pipes and Tubes for Pressure Purposes Carbon and Alloy Steel with

Specified Low Temperature Properties   (HFS410LT50/CFS410LT50/ERW410LT50)

BS3604 / Steel Pipes and Tubes for Pressure Purposes Ferritic Alloy Steel with Specified Elevated

Temperature Properties(JFS620-460/CFS620-460/ERW620-460/CEW620-460/HFS620-440/CFS620-440)

BS3605 PART1 / Seamless and Welded Austentic Stainless Steel Pipe and Tubes for

Pressure Purposes(Seamless Pipes With Specified Room Temperature Preperties)

BS3605 PART2 / Seamless and Welded Austentic Stainless Steel Pipe and Tubes for

Pressure Purposes (Welded Pipes With Specified Room Temperature Properties)

BS3606 / Steel Tubes for Heat Exchangers   (ERW320/CEW320/CFS320/ERW440/CEW440/CFS440/ERW243)

BS4127 / Light Gauge Stainless Steel Tubes(Round Pipe)

BS4825 / Pipes and Fittings for the Food Industry

BS5242 PART1 / Tubes for Fluid Power Cylinder Barrels   (HP1/HP2/HP3/HP4/HP4/HP6/HP1/HP2/)

BS5242 PART2 / Tubes for Fluid Power Cylinder Barrels   (HP1/HP2/HP3/HP4/HP4/HP6/HP1)

BS5242 PART3 / Tubes for Fluid Power Cylinder Barrels(for Mining)(HP1/HP2/HP3/HP4)

BS6323 PART2 / Seamless and Welded Steel Tubes for Automobile Mechanical and General

Engineer Purpose (Hot finished welded steel tubes)

BS6323 PART2 / Seamless and Welded Steel Tubes for Automobile Mechanical and General

Engineer Purpose(Hot finished welded steel tubes) (Square.Rectangular Pipe)

BS6323 PART3 / Seamless and Welded Steel Tubes for Automobile Mechanical and General

Engineer Puropese (Hot finished seamless steel tube)

BS6323 PART4 / Seamless and Welded Steel Tubes for Automobile Mechanical and General

Engineer Purpose   (Cold finished seamless tubes)

BS6323 PART5 / Seamless and Welded Steel Tubes for Automobile Mechanical and General

Engineer Purpose    (Electric resistanced welded(including induction welded)steel tubes)

BS6323 PART5 / Seamless and Welded Steel Tubes for Automobile Mechanical and General

Engineer Purpose    (Electric resistanced welded(including induction welded)steel tubes)

BS6323 PART6 / Seamless and Welded steel Tubes for Automobile Mechanical adn General

Engineer Purpose (Cold finished electric resistance welded (including induction welded) steel tubes)

BS6323 PART6 / Seamless and Welded steel Tubes for Automobile Mechanical adn General

Engineer Purpose (Cold finished electric resistance welded (including induction welded) steel tubes)

BS6323 PART7 / Seamless and Welded Steel Tubes for Automobile Mechanical and General

Engineer Purpose    (Submerged arc welded steel tubes)

BS6323 PART8 / Seamless and Welded Steel Tubes for Automobile Mechanical and General

Engineer Purpose(Longitudinally welded stainless steel tubes)

BS6323 PART8 / Seamless and Welded Steel Tubes for Automobile Mechanical and General

Engineer Purpose(Longitudinally welded stainless steel tubes)

BS6363 / Welded Cold Formed Steel Structural Hollow(34/26 / 43/36 / 50/45 /34/26 / 43/36 / 50/45)

BS7416 / Precision Finished Seamless Cold Drawn low Carbon Steel Tubes for Use in Hydraulic Fluid Power Systems

ASTM(ASTM International)

ASTM A53 / ASME SA53 / Pipe Steel Black and Hot Dipped Zinc Coated Welded and Seamless

ASTM A106 / ASME SA106 / Seamless Carbon Steel Pipe for High Temperature Service

ASTM A134 / ASME SA134 / Pipe Steel Electric Fusion(ARC) Welded(Sizes Nps 16 and Over)1

ASTM A135 / ASME SA135 / Pipe Steel Electric Fusion(ARC) Welded

ASTM A139 / ASME SA139 / Electric Resistance Welded Steel Pipe

ASTM A161 / ASME SA161/ Seamless Low Carbon And Cardon Molybdenum Steel Still Tubes For Refinery Service

ASTM A178 / ASME SA178 / Electric Resistance Welded Carbon Steel Boiler Tubes

ASTM A179 / Seamless Cold Drawn Low Carbon Steel Heat Exchanger and Condenser Tubes

ASTM A192 / ASME SA192 / Seamless Carbon Steel Boiler Tubes for High Pressure Service

ASTM A199 / ASME SA199 / Seamless Cold Drawn Intermediate Alloy Steel Heat Exchanger and Condenser Tubes

ASTM A200 / ASME SA200 / Seamless Intermediate Alloy Steel Still Tubes for Refinery Service

ASTM A209 / ASME SA209 / Seamless Carbon Molybdenum Alloy Steel Boiler and Superheater Tubes

ASTM A210 / ASME SA210 / Seamless Medium Carbon Steel Boiler and Superheater Tubes

ASTM A211 / ASME SA211 / Spiral Welded Steel or Iron Pipe

ASTM A213 / ASME SA213 / Seamless Ferritic and Austenitic Alloy Steel Boiler Superheater and Heat Exchanger Tubes

ASTM A214 / ASME SA214 / Electric Resistance Welded Carbon Steel Heat Exchanger and Condenser Tubes

ASTM A216 / ASME SA216 / Carbon Steel Castings Suitable for Fusion for High Temperature Service

ASTM A226 / ASME SA226 / Electric Resistance Welded Carbon Steel Boiler and Superheater Tubes for High Pressure Service

ASTM A249 / ASME SA249 / Welded Austentic Steel Boiler Superheater Heat Exchanger and Condenser Tubes

ASTM A250 / ASME SA250 / Electric Resistance Welded Carbon Molybdenum Alloy Steel Boiler and Superheater Tubes

ASTM A252 / ASME SA252 / Welded and Seamless Steel Pipe Piles

ASTM A254 / ASME SA254 / Copper Brazed Steel Tubing

ASTM A268 / ASME SA268 / Seamless and Welded Ferritic Stainless Steel Tubing For General Service

ASTM A269 / ASME SA269 / Seamless and Welded Austenitic Stainless Steel Tubing for General Service

ASTM A270 / ASME SA270 / Seamless and Welded Austenitic Stainless Steel Sanitary Tubing

ASTM A271 / ASME SA271 / Seamless Austenitic Chromium Nickel Steel Still Tubes for Refinery Service

ASTM A312 / ASME SA312 / Seamless and Welded Austenitic Stainless Steel Pipe

ASTM A333 / ASME SA333 / Seamless and Welded Steel Pipe for Low Temperature Service

ASTM A334 /ASME SA334 / Seamless and Welded Carbon and Alloy Steel Tubes for Low Temperature Service

ASTM A335 / ASME SA335 / Seamless Ferritic Alloy Steel Pipe for High Temperature Service

ASTM A358 / ASME SA358 / Electric Fusion Welded Austenitic Chromium Nickel Alloy Steel Pipe for High Temperature Service1

ASTM A369 / ASME SA369 / Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High Temperature Service

ASTM A376 / ASME SA376 / Seamless Austenitic Steel Pipe for High Temperature Central Station Service

ASTM A381 / ASME SA381 / Metal Arc Welded Steel Pipe for USE with High Pressure Transmission Systems

ASTM A405 / ASME SA405 / Seamless Ferritic Alloy Stlle Pipe Specially Heat Treated for High Temperature Service

ASTM A409 / ASME SA409 / Welded Large Diameter Austenitic Steel Pipe for Corrosive or High Temperature Service

ASTM A422 / ASME SA422 / Butt Welds in Still Tubes for Refinery Service

ASTM A423 / ASME SA423 / Seamless and Electric Welded Low Alloy Steel Tubes

ASTM A426 / ASME SA426 / Standard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High Temperature Service1

ASTM A430 / ASME SA430 / Austentic Steel Forged and Bored Pipe for High Temperature Service

ASTM A450 / ASME SA450 / General Requirements for Carbon Ferritic Alloy and Austentic Alloy Steel Tubes1

ASTM A451 / ASME SA451 / Centrifugally Cast Austenific Steel Pipe for High Temperature Service1

ASTM A452 / ASME SA452 / Centrifugally Cast Austenitic Steel Cold Wrought Pipe for High Temperature Service

ASTM A498 / ASME SA498 / Seamless and Welded Carbon Ferritic and Austenitic Alloy Steel Heat-Exchanger Tubes With Integral Fins1

ASTM A500 / ASME SA500 / Cold Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes(Round Pipe)

ASTM A500 / ASME SA500 / Cold Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes(Square . Rectangular pipe)

ASTM A501 / ASME SA501 / Hot Formed Welded and Seamless Carbon Steel Structural Tubing

ASTM A511 / ASME SA511 / Seamless Stainless Steel Mechanical Tubing

ASTM A512 / ASME SA512 / Cold Drawn Buttweld Carbon Steel Machanical Tubing

ASTM A513 / ASME SA513 / Electric Resistance Welded Carbon and Alloy Steel Mechanical Tubing

ASTM A519 / ASME SA519 / Seamless Carbon and Alloy Steel Mechanical Tubing

ASTM A520 / ASME SA520 / Supplementary Requirements for Seamless and Electric Resistance Welded Carbon Steel Tubular Products for High-Tmeperature Service Conformigf to ISO Recommendations for Boiler Construction1

ASTM A523 / ASME SA523 / Plain end Seamless and Electric Resistance Welded Steel Pipe for High Pressure Pipe Type Cable Circuits

ASTM A524 / ASME SA524 / Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures

ASTM A530 / ASME SA530 / Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe1

ASTM A539 / ASME SA539 / Electric Resistance Welded Coiled Steel Tubing for Gas and Fuel Oil Lines

ASTM A554 / ASME SA554 / Welded Stainless Steel Mechanical Tubing(Round Pipe)

ASTM A554 / ASME SA554 / Welded Stainless Steel Mechanical Tubing(Square . Rectangular pipe)

ASTM A556 / ASME SA556 / Seamless Cold Drawn Carbon Steel Feedwater Heater Tubes

ASTM A557 / ASME SA557 / Electric Resistance Welded Carbon Steel Feedwater Heater Tubes

ASTM A587 / ASME SA587 / Electric Welded Low Carbon Steel Pipe for the Chemical Industry

ASTM A589 / ASME SA589 / Seamless and Welded Carbon Steel Water Well Pipe

ASTM A595 / ASME SA595 / Steel Tubes Low Carbon Tapered for Structural Use

ASTM A608 / ASME SA608 / Centrifuhally Cast Iron Chromium Nickel High Alloy Tubing for Pressure Application at High Temperature

ASTM A618 / ASME SA618 / Hot Formed Welded and Seamless High Strength Low Alloy Structural Tubing

ASTM A632 / ASME SA632 / Seamless and Welded Austenitic Stainless Steel Tubing(Small Diameter)for General Service

ASTM A660 / ASME SA660 / Centrifugally Cast Carbon Steel Pipe for High Temperature Service

ASTM A671 / ASME SA671 / Electric Fusion Welded Steel Pipe for Atmospheric and Lower Temperature

ASTM A672 / ASME SA672 / Electric Fusion Welded Steel Pipe for High Pressure Service at Moderate Temperatures

ASTM A688 / ASME SA688 / Welded Austenitic Stainless Steel Feedwater Heater Tube

ASTM A691/ ASME SA691 / Carbon And Alloy Steel Pipe Electric Fusion Welded for High Pressure Service at High Tempeeratures

ASTM A692 / ASME SA692 / Seamless Medium Strength Carbon Molybdenum

ASTM A714 / ASME SA714 / High Strength Low Alloy Welded and Seamless Steel Pipe

ASTM A727 / ASME SA727 Forgings, Carbon Steel, for piping components with Inherent Notch Toughness1

ASTM A731 / ASME SA731 / Seamless and Welded Ferritic Stainless Steel Pipe

ASTM A733 / ASME SA733 / Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Niples1

ASTM A771 / ASME SA771 / Austenitic Stainless Steel Tubing for Breeder Reactor Core Components

ASTM A778 / ASME SA778 / Welded Unannealed Austenitic Stainless Tubluar Products

ASTM A787 / ASME SA787 / Standard Specification for Electric Resistance Welded Metallic Coated Carbon Steel Mechanical Tubing1

ASTM A789 / ASME SA789 / Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe for General Service

ASTM A790 / ASME SA790 / Welded Unannealed Ferritic Stainless Steel Tubing

ASTM A791 / ASME SA791 / Welded Unannealde Ferritic Stainless Steel Tubing

ASTM A795 / ASME SA795 / Black and Hot-Dipped Zinc Coated(Galvanized) Welded and Seamless Steel Pipe for Fire Protection USE1

ASTM A803 / ASME SA803 / Welded Ferritic Stainless Steel Feed Water Heater Tubes

ASTM A813 / ASME SA813 / Single or Double Welded Austentic Stainless Steel Pipe

ASTM A814 / ASME SA814 / Cold Worked Welded Austenitic Stainless Steel Pipe

ASTM A822 / ASME SA822 / Seamless Cold Dram Carbon Steel Tubing For Hydraulic System Service

ASTM A826 /ASME SA826 / Austenitic and Ferritic Stainless Steel Duct Tubes for Breeder Reactor Core Components

ASTM A847 / ASME SA847 / Cold Formed Welded and Seamless High Strength Low Alloy Structural Tubing With Improved Atmospheric Corrosion Resistance

ASTM A851 / ASME SA851 / High Frequency Induction Welded Unannealed Austenitic Steel Condenser Tubes

ASTM A865 / ASME SA865 / Threaded Couplings Steel Black or Zinc Coated(Galvanized) Welded or Seamless for Use in Steel Pipe Joints1

ASTM A872 / ASME SA872 / Centrifugally Cast Ferrific/Austenitic Stainless Steel Pipe for Corrosive Environments

ASTM A908 / ASME SA908 / Stainless Steel Needile Tubing1


JIS(Japan Industrial Standards)

JIS G3442 Galvanized Steel Pipes for Water Service (SGPW)

JIS G3447 Stainless Steel sanitary Pipes (SUS 304TBS/304LTBS/ 316TBS/316LTBS)

JIS G3448 Light Gauge Stainless Steel Pipes for Ordinary Piping (SUS304TPD/316TPD)

JIS G3452 Carbon Steel Pipes for Ordinary Piping (SGP)

JIS G3454 Carbon Steel Pipes for Pressure Service (STPG 370/STPG 410)

JIS G3455 Carbon Steel Pipes for High Pressure Service (STS 370/STS 410/STS 480)

JIS G3456 Carbon Steel Pipes for High Temperature Service (STPT370/STPT410/STPT480)

JIS G3457 Arc Welded Carbon Steel Pipes (STPY400)

JIS G3458 Alloy Steel Pipes (STPA 12/ 20/ 22/ 23/ 24/ 25/ 26)

JIS G3459 Stainless Steel Pipes (SUS 304TP/304HTP/304LTP/309TP/309STP)

JIS G3460 Steel Pipes for Low Temperature Service (STPL 380/STPL 450/STPL 690)

JIS G3468 Arc Welded Large Diameter Stainless Steel Pipes (SUS304TPY /304LTPY)

JIS G3469 Polyethylene coated Steel Pipes (P1H /P2S/P1F)


JIS G3461 Carbon Steel Tubes for Boiler and Heat Exchagner (STB 340/STB 410/STB 510)

JIS G3462 Alloy Steel for Boiler and Heat Exchanger Tubes (STBA12/ 13/ 20/ 22)

JIS G3463 Stainless Steel for Boiler and Heat Exchanger Tubes (SUS304TB/304HTB/316TB)

JIS G3464 Steel Heat Exchanger Tubes for Low Temperature Service (STBL380/ 450/690)

JIS G3467 Steel Tubes for Fired Heater (STF 410/STFA 12/ 22/ 23/ 24/ 25/ 26)

JIS G3131 Hot-Roll mild steel plates, sheet and strip (HR Pipe SPHC/SPHD/SPHE)

JIS G3141 Cold-reduced carbon steel sheets and strip(CR Pipe SPCC/SPCD/SPEC)

JIS G3441 Alloy steel tubes for machine purposes (SCr420TK/SCM415TK/418TK/420TK)

JIS G3444 Carbon steel tubes for general structural purposes (STK290/STK400/500/490)

JIS G3445 Carbon steel tubes for machine structural purposes (STKM11A/12A/13A/14A)

JIS G3446 Stainless steel pipes for machine and structural purposes (SUS304TKA)ROUND

JIS G3446 Stainless steel pipes for machine and structural purposes (SUS304TKA)Square.Re.

JIS G3466 Carbon steel Square for general structural purposes (STKR 400/STKR 490)

JIS G3471 Corrugated steel pipes and sections (SCP1R/SCP 1 RS/SCP 2 R/SCP 3 RS/SCP2E)

JIS G3472 Electric Resistance Welded Carbon Steel Tubes for Automobile Structural Purposes

JIS G3473 Carbon Steel Tubes Cylinder Barrels (STC370/STC440/STC510A/STC510B/STC540)

JIS G3474 High Tensile Strength Steel Tubes for Tower Structural Purposes (STKT540/590)

JIS G4051 Carbon steel for Machine Structural Use (S45C Pipe)

JIS A5525 Steel pipes piles (SPS290/SPS400/SPS500/SPS490/SPS540)

JIS A5530 Steel pipe sheet piles (SKY 400/SKY 490)

JIS G3429 Seamless Steel Tubes for High Pressure Gas Cylinder (STH 11/STH 12/STH 21..)

JIS G3465 Seamless Steel Tubes for Drilling (STM-C 540/STM-C 640 /STM-R 590/STM-R 690)

JIS G4903 Seamless nickel-chromium-iron alloy pipes (NCF600TP/NCF625TP/NCF690TP)

JIS G4904 Seamless nickel-chromium-iron alloy heat exchanger tubes (NCF600TB/NCF625TB)

JIS C8305 Rigid steel conduits (G 16/G 22/G 28/G 36/G 42/G 54/G 70/G 82)

JIS C8380 Plastic coated steel pipes for cable ways (G16LL/G16LT/G 22LL/G 22LT/G 28LL8LT)

JIS G4805 Seamless Pipe High Carbon Chromium Bearing Steel Pipe (SUJ-2)

DIN(Deutsches Insititut for Normung)

DIN1615 / Welded Circular Unalloyed Steel Tubes Not Subject To Special Requirements

DIN1626 / Welded Circular Tubes of Non Alloy Steels with Special Quality Requirements

    (USt37.0/St37.0/St44.0/St52.0)

DIN1628 / Welded Circular Tubes of Non Alloy Steels with Very High Quality Requirements

    (St37.4/St44.4/St52.4)

DIN1629 / Seamless Circular Tubes of Non Alloy Steels with Special Quality Requirements

    (St 37.0/St 44.0/St 52.0/1.0254/1.0256/1.0421)

DIN1630 / Seamless Circular Tubes of Non Alloy Steels with Very High Quality Requirements

    (St 37.4/St 44.4/St 52.4/1.0255/1.0257/1.0581)

DIN2391-1 / Seamless Precision Steel Tubes    (St30Si/St30A1/St35/St45/St52)

DIN2391-2 / Seamless Precision Steel Tubes    (St30Si/St30A1/St35/St45/St52)

DIN2393-1 / Welded Precision Steell Tubes

    (St28/USt28/RSt28/St34-2/US34-2/RSt34-2/St37-2/USt37-2/RSt37-2/St44-2/St52-3)

DIN2393-2 / Welded Precision Steell Tubes

    (St28/USt28/RSt28/St34-2/US34-2/RSt34-2/St37-2/USt37-2/RSt37-2/St44-2/St52-3)

DIN2394-1 / Welded And Sized Precision Steel Tubes

    (St28/USt28/RSt28/St34-2/US34-2/RSt34-2/St37-2/USt37-2/RSt37-2/St44-2/St52-3)

DIN2394-2 / Welded And Sized Precision Steel Tubes

    (St28/USt28/RSt28/St34-2/US34-2/RSt34-2/St37-2/USt37-2/RSt37-2/St44-2/St52-3)

DIN2395-1 / Rectangular and Square Electric Welded Precision Steel Tubes

DIN2395-2 / Rectangular and Square Electric Welded Precision Steel Tubes     (St 34.2/St 37.2/St 52.3)

DIN2395-3 / Rectangular and Square Electric Welded Precision Steel Tubes

DIN2402 Pipelines Nominal Widths efinition Grading Pipework; grading of nominal sizes

DIN2403 Marking of pipes according to fluid transported

DIN2413 Part1 Design of steel pressure pipes

DIN2413 Part2 Design of steel bends used in pressure pipelines

DIN2440 / Steel Tubes Medium Weight Suitable for Screwing     (St33.2)

DIN2441 / Steel Tubes Heaby Weight for Suitable for Screwing    (St33.2)

DIN2444 / Zinc Coatings on Steel Tubes

DIN2445-1 / Seamless Steel Tubes for Dynamic Loads Hot Finished Tubes Nominal Pressures 100 to 400

DIN2445-2 / Seamless Steel Tubes for Dynamic Loads Basis for Caluculation of Straight Tubes

    (St 35,4/St 52,4)

DIN2448 / Seamless Steel Pipes and Tubes

DIN2449 / Seamless Steel Pipes and Tubes

DIN2450 / Seamless Steel Tubes in St 35 Dimensions and Range of ApplicationTION

DIN2458 / Welded Steel Pipes and Tubes

DIN2460 / Steel Pipes for Water Pipelines

DIN2462 / Seamless Tubes Of Stainless Steel     (1.4301 / 1.4306 / 1.4311 / 1.4541 / 1.4550 / 1.4401 / 1.4404 / 1.4571)

DIN2463 / Weldel Tubes of Austenitic Stainless Steel

    (X5CrNi189/X2CrNi189/X5CrNiMo1810/X2CrNiMo1810/X2CrNiMo1812/X5CrNiMo1812/X10CrNiTi189)

DIN2916 Bending Radii for seamless and Welded Steel Tubes

DIN2917 Seamless steel tubes for superheated pipelines and headers

DIN17100 / Steels for General Structural Purposes

    (St33/St37.2/USt37.2/RSt37.2/St37.3/St44-2/St44-3/St50-2/St60-2/St52-33/St50-2/St60-2/St70-2)

DIN17102 / Weldable Normalized Fine Grain Structural Steels

    (StE255/WStE255/TStE255/EStE255/StE285/WStE285/TStE285/EStE285/)

DIN17119 / Welded     Cold Formed Square And Rectangular Steel Tubes for Structural Steel work

    (USt 37-2/RSt 37-2/St 37-3/St 44-2/St 44-3/St 52-3/WTSt 37-2/WTSt 37-3/WTSt 52-3)

DIN17120 / Welded Circular Steel Tubes for Structural Steelwork

    (USt37-2/RSt37-2/St37-2/St44-2/St44-3/St52-3)

DIN17121 / Seamless Circlar Steel Tubes for Structural Steelwork

    (RSt37-2/St37-3/St44-2/St44-3/St52-3)

DIN17123 / Welded Circular Fine Grain Steel Tubes for Structural Steelwork

    (StE225/TStE255/EStE255/StE285/StE355/TStE355/EStE355/StE420/TStE420/EStE420)

DIN17124 / Carbon and Ferritic Alloy Steel Forged and Bored Pipe for Hig Temperatur Service

    (StE255/TStE255/EStE255/StE285/TStE285/EStE285/StE355/TSTE355/EStE355/StE420/TStE420/EStE420)

DIN17172 / Steel Pipes for Pipe Lines for the Transport of Combustible Fluids and Gases

    (StE210.7/StE240.7/StE290.7/StE320.7/StE360.7/StE385.7/StE415.7/StE290.7TM/StE207.7TM/StE360.7TM)

DIN17173 / Seamless Circular Tubes Made From Steels with Low Temperature Service

    (TSt35N/TSt35V/26CrMo4/11MnNi53/13MnNi63/10Ni14/12Ni19/X8Ni19)

DIN17174 / Seamless Steel Tubes for Elevated Temperatures

    (TTSt 35 N/TTSt 35 V/11 MnNi 5 3/13 MnNi 6 3/10 Nl 14/12 Nl 19/X 8 Ni 9/1.0356/1.6212/1.6217/1.5637/1.5680)

DIN17175 / Electricall Resitance Or Induction Weled Steel Tubes for Elevated Temperature

    (St35.8/St45.8/17Mn4/19Mn5/15Mo3/13CrMo910/10CrMo910/14MoV63/X20CrMoV121)

DIN17176 Seamless circular steel tubes for hydrogen service at elevated temperatures and pressures Technical delivery condition

DIN17177 / Electrically Resitance or Induction Welded Steel Tubes for Elevated Temperature

    (St37.8/St42.8/15Mo3)

DIN 17178 Welded circular fine grain steel tubes subject to special requirements Technical delivery conditions

DIN 17179 Seamless circular fine grain steel tubes subject to special requirements Technical delivery conditions

DIN17455 / General Purpose Welded Circular Stainless Steel Tubes(Round Pipe)

    ( 1.4301 / 1.4306 / 1.4311 / 1.4541 / 1.4550 / 1.4401 / 1.4404 / 1.4571)

DIN17455 / General Purpose Welded Circular Stainless Steel Tubes(Square.Rectangular Pipe)

    ( 1.4301 / 1.4306 / 1.4311 / 1.4541 / 1.4550 / 1.4401 / 1.4404 / 1.4571)

DIN17456 / General Purose Seamless Circular Stainless Steel Tubes

    ( 1.4301 / 1.4306 / 1.4311 / 1.4541 / 1.4550 / 1.4401 / 1.4404 / 1.4571)

DIN17457 / Welded Circular Austenitic Stainless Steel Tubes Subject to Special Requirements

    ( 1.4301 / 1.4306 / 1.4311 / 1.4541 / 1.4550 / 1.4401 / 1.4404 / 1.4571)

DIN17458 / Seamless Circular Austenitic Stainless Steel Tubes Subject to Special Requirements

    (1.4301 / 1.4306 / 1.4311 / 1.4541 / 1.4550 / 1.4401 / 1.4404 / 1.4571)

DIN17671 / Wrought Copper and Copper Alloy Tubes Properties

DIN 59410 Hollow Sections for Structural Steel Engineering ot Formed Square and Rectangular Steel Tubes Dimensions, Weights, Perissible Deviations, Static Values

DIN 59411 Hollow Sections for Structural Steel Engineering Cold Formed Welded Square and Rectangular Steel Tubes Dimension, Weights, Permissible Deviations, Static Values

ISO(International organization for Standaridization)

ISO 65 / Carbon Steel Tubes Suitable for Screwing in Accordance with ISO 7/1     (TS/TW)

ISO 559 / Welded or Seamless Steel Tubes for Water Sewage and Gas (TSO/TWO/TS1/TW1/TS4/TW4/TS9/TW9)

ISO 2604-2 / Steel Products for Pressure Purposes PART2 Wrought Seamless Tubes

    (TS1/TS2/TS4/TS5/TS6/TS9/TS9H/TS10/TS13/TS14/TS15)

ISO 2604-3 / Steel Products for Pressure Purpose Parts Electric Resistance and Induction Welded Tubes     (TW1/TW2/TW4/TW5/TW6/TW9/TW9H/TW10/TW13/TW14)

ISO 2604-5 / Steel Products for Pressure Purposes PART5 Longitudinally Welded Austenitic stainless Steel Tubes     (TW46/TW47/TW50/TW53/TW57/TW58/TW60/TW61/TW69)

ISO 2937 / Plain End Seamless Steel Tubes for Mechanical Application    (TS1/TS4/TS9/TS18/C35)

ISO 2938 / Hollow Steel Bars for Machining     (Gr1/Gr2)

ISO 3183 / Oil and Natural Fas Industries Steel Line Pipe     (E17/E21/E24-1/E24-2)

ISO 3304 / Plain end Seamless Precision Steel Tubes     (R28/R33/R37/R42/R50)

ISO 3305 / Plain end Welded Precision Steel Tuves     (R28/R33/R37/R44/R50)

ISO 3306 / Plain end as Welded and Sized Precision steel Tubes    (R28/R33/R37/R44/R50)

KS(Korean Standards)

KS D 3507 Carbon Steel Pipes for Ordinary Piping (SPP ZINC WATER)

KS D 3507 Carbon Steel Pipes for Ordinary Piping (SPP BLACK)

KS D 3537 Galvanized Steel Pipes for Water Service (SPPW)

KS D 3562 Carbon Steel Pipes for Pressure Service (SPPS 370/SPPS 410)

KS D 3564 Carbon Steel Pipes for High Pressure Service (SPPH 370/SPPH 410/SPPH 480)

KS D 3569 Steel Pipes for Low Temperature Service (SPLT 380/SPLT 450/SPLT 690)

KS D 3570 Carbon Steel Pipes for High Temperature Service (SPHT370/SPHT410/SPHT480)

KS D 3573 Alloy Steel Pipes (SPA 12/SPA 20/SPA 22/SPA 23/SPA 24/SPA 25/SPA 26)

KS D 3576 Stainless Steel Pipes (STS304TP/STS304HTP/STS304LTP/STS309TP/STS309STP)

KS D 3583 Arc Welded Carbon Steel Pipes (SPW 400)

KS D 3585 Stainless Steel sanitary Pipes (STS 304TBS/STS 304LTBS/STS 316TBS)

KS D 3588 Arc Welded Large Diameter Stainless Steel Pipes (STS 304 TPY/STS 304 LTPY)

KS D 3589 Polyethylene coated Steel Pipes (P1H/P2S/P1F)

KS D 3595 Light Gauge Stainless Steel Pipes for Ordinary Piping (STS 304 TPD/STS 316 TPD)


KS D 3563 Carbon Steel Tubes for Boiler and Heat Exchaner (STBH 340/STBH 410/ 510)

KS D 3571 Steel Heat Exchanger Tubes for Low Temperature Service (STLT380/STLT450)

KS D 3572 Alloy Steel for Boiler and Heat Exchanger Tubes (STHA 12/STHA 13/STHA 20)

KS D 3577 Stainless Steel for Boiler and Heat Exchanger Tubes (STS 304TB/STS 304HTB)

KS D 3587 Steel Tubes for Fired Heater (STF410/STFA12/STFA22/STFA23/STFA24/STFA25)

KS D 3517 Carbon steel tubes for machine structural purposes (STKM 11A/STKM 12A)

KS D 3536 Stainless steel pipes for machine and structural purposes (STS430TKA/430TKC

KS D 3536 Stainless steel pipes for machine and structural purposes (STS304TKA/430TKC)

KS D 3566 Carbon steel tubes for general structural purposes (SPS 290/SPS 400/SPS 500)

KS D 3568 Carbon steel Square for general structural purposes (SPSR 400/SPSR 490)

KS D 3574 Alloy steel tubes for machine purposes (SCr 420 TK/SCM 415 TK/SCM 418 TK)

KS D 3590 Corrugated steel pipes and sections (SCP 1 R/SCP 1 RS/SCP 2 R/SCP 3 RS)

KS D 3598 Electric Resistance Welded Carbon Steel Tubes for Automobile Structural Purposes   (STAM 290GA/STAM 290GB/STAM 340G/STAM 390G/440G/470G/500G)

KS D 3618 Carbon Steel Tubes Cylinder Barrels (STC 370/STC 440/STC 510 A/STC 510 B)

KS D 3780 High Tensile Strength Steel Tubes for Tower Structural Purposes (STKT 540)

KS F 4602 Steel pipes piles (SPS30/SPS41/SPS51/SPS50/SPS55)

KS F 4605 Steel pipe sheet piles (SKY 400/SKY 490 )

KS D 3575 Seamless Steel Tubes for High Pressure Gas Cylinder (STHG11/STHG12/STHG21)

KS D 3757 Seamless nickel-chromium-iron alloy heat exchanger tubes (NCF 600 TB)

KS D 3758 Seamless nickel-chromium-iron alloy pipes (NCF600TP/NCF625TP/NCF690TP)

KS C 8401 Rigid steel conduits (G16/G22/G28/G36/G42/G54/G70/G82/G92/G104)

KS E 3114 Seamless Steel Tubes for Drilling (STM-C 540/STM-C 640/STM-R 590/R 690)

NF(Norme Francise)

NF A49-111 / Steel Tubes Plain end Seamless Tubes of Commercial Quality for General Purposes at Medium Pressure    (TU37a)

NF A49-112 / Steel Tubes Plain end Seamless Hot Rolled Tubes with Special Delivery Conditions    (TUE220A/TUE235A)

NF A49-115 / Steel Tubes Seamless Plain end Tubes for Pipe Lines and General Use Ferritic And Austenitic Stainless Steels    (TUZ2CN18-10/TUZ6CN18-09//TUZ6CND17-11)

NF A49-141 / Steel Tubes Seamless Plain end Tubes for Pipe Lines and General Use Ferritic and Austenitic Stainless Steels    (TS37a)

NF A49-142 / Steel Tubes Longitudinally Pressure Welded Plain Ended And Hot Finished Tubes    (TES185A/TSE235A/TSE250A/TSE275A)

NF A49-145 / Steel Tubes Hot Finished welded Tubes Suitable for Threading    (TS334-1)

NF A49-146 / Steel Tubes Unthreaded Plain Ended Welded Tubes for Liquids    (TS34-a)

NF A49-148 / Steel Tubes Plain end Longitudinally Welded Tubes for Pipe Lines adn General use Ferritic Stainless Steels    (TSZ5CT14/TSZ6CT17/TSZ6CT17/TSZ18C17)

NF A49-150 / Steel Tubes Welded Tubes Intended to be Coated of Protected for use in Water Piping Systems    (TSE235)

NF A49-175 / Steel Tubes Plain end Longitudinally Welded Tubes for Pipe Lines and General use Austenitic Stainless Steel    (TSZ2CN18-10/TSZ6CN18-09/TSZ3CNT18-10)

NF A49-207 / Steel Tubes Seamless or Longitudinally Welded Stainless Steel Tubes For Exchangers in Aircraft Construction    (TSZ2CN18-10/TUZ2CN8-10/TSZ6CNNb18-12)

NF A49-210 / Steel Tubes Seamless Cold Drawn Tubes for Fluid Piping

    (TU37B/TU42B)

NF A49-211 / Steel Tubes Seamless Plain end Unalloyed Steel Tubes for Fluid Piping at Elevated Temperatures    (TUE220/TUE250/TUE275)

NF A49-212 / Steel Tubes Seamless Unalloyed Steel Tubes for Use At Medium Temperatures    (TU37C/TU42C)

NF A49-213 / Steel Tubes Seamless Unalloyed and Mo Crmo Alloy Steel Tubes for Use at High Temperatures    (TU37C/TU42C/TU42CR/TU48C/TU48CR/RU52C/TU15D3/TU15CD2-05)

NF A49-214 / Steel Tubes Seamless Austenitic Steel Tubes for use at High Temperatures    (Z6CN19-10/Z3CND17-12B/Z6CNT18-12B/Z6CNNb18-12B/)

NF A49-215 / Steel Tubes Seamless Tubes For Ferritic NonAlloy And Alloy Heat Exchangers    (TU37C/TU42C/TU48C/TU15D3/TU15CD2-05/TU10CD5-05/TU10CD9-10)

NF A49-217 / Steel Tubes Seamless Tubes for Heat Exchangers    (TUZ12C13/TUZ10C17/TUZ2CN1810/TUZ2CN1810AZ/TUZ3CN1809/TUZ1CNS1815)

NF A49-218 / Steel Pipes Seamless Pipes for Rurnaces Austenitic Stainless Steels

    (TUZ6CN18-09/TUZ2CN18-10/TUZ6CNT18-10/TUZ6CNNb18-10/TUZ6CND17-11/TUZ2CND17-12)

NF A49-230 / Steel Tubes Plain end Seamless Tubes for Pressure Vessels and Piping Systems Used at Low Temperatures    (TU42BT/TU17N2/TU10N9/TU10N14/TUZ6N9)

NF A49-240 / Steel Tubes Longitudinally Butt welding Plain End for Pressure Vessels and Pipe Systems Used at Low Temperatures    (TS42BT/TS17N2/TS10N9)

NF A49-241 / Steel Tubes Longitudinally Pressure Welded Tubes D 168.3mmMax in not Alloyed and Low Alloyed at Medium Elevated Temperatures(TS37C/TS42C/TSE24W3)

NF A49-242 / Steel Tubes Longitudinally Pressure Welded Tubes D 168.3mmMax in not Alloyed and Low Alloyed at Medium Elevated Temperatures

    (TS37C/TS42C/TSE24W3/TSE36WB3)

NF A49-243 / Steel Tubes Longitudinally Pressure Welded Tubes D 168.3mm in not Alloyed and Ferritic Alloyed Steels Used at Elevated Temperatures

    (TS37C/TS42C/TS48C/TS52C/TS15D3/TS15CD2-05/TS15CD4-05)

NF A49-245 / Steel Tubes Longitudinally Welded Tubes For Ferric Non Alloy and Alloy Steel Heat Exchangers    (TS34C/TS37C/TS42C/TS48C/TS24W3)

NF A49-249 / Steel Tubes Longitudinally Welded Plain End Tubes for Food Industry Austenitic Staniness Steels    (TSZ6CN18-09/TSZ2CN18-10/TSZ2CND17-12/TSZ2CND17-11)

NF A49-250 / Steel Tubes Welded Plain End Tubes of Commercial Quality with or Without Special Delivery ConditionsD168.3mmMax    (TSE24a/TSE26b)

NF A49-253 / Steel Tubes Longitudinally Fusion Welded Non Alloy and Ferritic Alloy Steel Tubes for use at Elevated Temperatures    (TS37CP/TS42CP/TS48CP/TS52CP)

NF A49-310 / Steel Tubes Seamless Precision Tubes for Mechanical Application

    (TU37-b/TU52-b/TU56-b)

NF A49-311 / Steel Tubes Seamless for Mechanical Application

    (TU37-b/TU52-b/TU56-b/TUXC35)

NF A49-312 / Steel Tubes Seamless Tubes for Mechanical Application Supplementary Series    (TU52-b/TUXC35)

NF A49-317 / Steel Tubes Seamless Plain end Tubes for Engineering Use Austenitic Stainless Steel    (TUZ2CN18-10/TUZ2CN17-12)

NF A49-321 / Steel Tubes Jacks for Hydraulic Transmissions Cold Roled

    (TU37b/TU52b/TU52BT/TU18/MDV5/TU17/MV5)

NF A49-322 / Steel Tubes Jacks for Hydraulic Transmissions Cold Rolled or Cold Drawn Seamless Tubes Type Suitable for Grinding in    (TU37b/TU52b/TU17/MV5)

NF A49-323 / Steel Tubes Jacks for Hydraulic Transmissions Clod Rolled or Cold Drawn Seamless Tubes Type Ready for Use    (TU37b/TU52b/TU52BT/TU17/MV5)

NF A49-326 / Steel Tubes Jacks for Pneumatic Transmissions Clod Drawn Seamless Tubes Type Suitable for Grinding in    (TU37b/TU52b/TU52BT)

NF A49-327 / Steel Tubes Jacks for Pneumatic Transmissions Cold Drawn Seamless Tubes Type Ready for Use    (TU37b/TU52b)

NF A49-330 / Steel Tubes Seamless Cold Drawn Tubes for Hydraulic and Pneumatic Power Systems

    (TU37b/TU52b/TU42BT/TU17N2/TU10N14)

NF A49-341 / Steel Tubes Precision Welded Tubes for Mechanical Application

    (TS30o/TS30a/TS34a/TS7a/TS42a/TS47a)

NF A49-343 / Steel Tubes Longitudinally Welded Tube D 168.3mmMax for Engineering Use    (TS37b/TS815M5/TS18/MDV5)

NF A49-400 / Longitudinally Electric Resistance Welded Unalloyed Steel Tubes D 17.2Min 406.4mmMax for the Transport of Pressurized Fluids

    (TSE220/TSE250/TSE290/TSE320/TSE360Nb/TSE360B/TSE415Nb/TSE415V)

NF A49-401 / Steel Tubes Longitudinally Fusion Welded Non Alloy and Micro Alloy Sttel Tubes for Fluid Transporting Pipes and Pressure Vessels

    (TSE220/TSE250/TSE290/TSE320/TSE360/TSE415/TSE450/TSE480)

NF A49-402 / Steel Tubes Spiral Fusion Welded Non Alloy and Micro Alloy Steel Tubes for Fluid Transporting Pipes and Pressure Vessels

    (TSE220/TSE250/TSE290/TSE320/TSE360/TSE415/TSE450/TSE480)

NF A49-501 / Steel Tubes Seamless or Welded Hot Finished Structural Hollow Sections

    (TUTSE235-2/TUTSE235-3/TUTSE235-4/TUTSE275-2/TUTSE275-3/TUTSE175-4/TSE295-2)

NF A49-541 / Steel Tubes Cold Finished Welded Structural Hollow Sections

    (TSE235-2/TSE235-3/TSE235-4/TSE275-2/TSE275-3/TSE275-4)

NF A49-643 / Steel Tubes Round Square and Rectangular Steel Tubes for Ordinary Longitudinally Pressure Welded and Cold Formed From Flat Froducts

    (TS30-1/TS30-2/TS34-2/TS37-2/TS42-2/TS47-2/TS335D/TS390D/TS445D) (Round)

NF A49-643 / Steel Tubes Round Square and Rectangular Steel Tubes for Ordinary Longitudinally Pressure Welded and Cold Formed From Flat Products

    (TS30-1/TS30-2/TS34-2/TS37-2/TS42-2/TS47-2/TS335D/TS390D/TS445D) (Square.Rectangular)

NF A49-645 / Steel Tubes Structural Welded Tubes Circular Square Rectangular or Oval in Ferritic or Austenitic Stainless Steels    (TSZ2CN18-10/TSZ6CN18-09/TSZ6CND17) (Round)

NF A49-645 / Steel Tubes Structural Welded Tubes Circular Square Rectangular or Oval in Ferritic or Austenitic Stainless Steels    (TSZ2CN18-10/TSZ6CN18-09/TSZ6CND17) (Square.Rectangular)

NF A49-647 / Steel Tubes Structural Welded Tubes Circular Square Rectangular or Oval in Ferritic or Austenitic Stainless Steels    (TSZ2CN18-10/TSZ6CN18-09/TSZ6CND17-11) (Round)

NF A49-647 / Steel Tubes Structural Welded Tubes Circular Square Rectangular or Oval in Ferritic or Austenitic Stainless Steels    (TSZ2CN18-10/TSZ6CN18-09/TSZ6CND17-11) (Square.Rectangular)

GOST RUSSIA STANDARD

Smooth Seamless Steel Tubes

GOST 8731-74 Seamless Hot-Deformed Steel Tubes. Technical requirements.

GOST 8732-78 Seamless hot-deformed steel tubes. Range.

GOST 8733-74 Seamless cold and warm deformed steel tubes.Technical requirements.

GOST 8734-75 Seamless cold and warm deformed steel tubes. Range.

GOST 9567-75 Precision tubes steel. Range.

GOST 9940-72 Seamless hot deformed tubes made of corrosion resistant steel.

GOST 9941-72 Seamless cold and warm deformed tubes made of corrosion Resistant steel.

GOST 10498-63 Especially thin walled seamless tubes made of corrosion resistant (stainless) steel.

GOST 1060-76 Steel seamless cold-deformed tubes for shipbuilding.Technical requirements.

GOST 5654-76 Steel seamless hot-deformed tubes for shipbuilding.Technical requirements.

GOST 550-75 Steel seamless steel tubes for petroleum processing and petrochemical industry.

GOST 14162-69 Small-sizes steel tubes ( capillary ).

GOST 10192-62 Bimetallic seamless tubes. Range.

GOST 21945-76 Seamless hot-deformed steel tubes made of alloys on the basis of titanium. Technical requirements.

GOST 21729-76 Seamless cold-deformed and hot-deformed tubes made of structural carbon and alloyed steel.

GOST 22786-77 Bimetallic seamless tubes for shipbuilding. Technical requirements

GOST 631-75 Internal-external upset drill tubes with couplings.

GOST 8467-57 Drill tubes for geology-exploring with nipple connections.

GOST 632-64 Casing tubes with couplings.

GOST 6238-77 Casing and coring tubes for geology-exploring drilling and nipples to them. Technical requirements.

GOST 633-63 Tubing pipes with couplings.

GOST 10704-76 Electrically welded steel tubes, line-weld. Range.

GOST 10706-76 Electrically welded steel tubes, line-weld. Technical requirements.

GOST 10707-73 Electrically welded cold-drawn and cold-rolled steel tubes.Technical requirements.

GOST 11068-64 Electrically welded stainless steel tubes

GOST 3262-75 Steel tubes for water and gas supply with couplings.

GOST 8696-74 Electrically welded steel tubes with spiral seams for general purposes

GOST 5005-65 Electrically welded steel tubes for car cardan shafts.

GOST 11249-73 Steel rolled up soldered double-layer tubes.

GOST 12132-66 Electrically welded and seamless steel tubes for automotive and bicycle industries.

GOST 20295-74 Welded steel tubes for main oil and gas pipelines.

GOST 13663-68 Shaped steel tubes. Technical requirements.

GOST 3664-68 Steel tubes star-shaped. Range.

GOST 13665-68 Corrugated steel tubes. Range.

GOST 13666-68 Many-ribbed steel tubes. Range.

GOST 13667-68 Ribbed steel tubes. Range.

GOST 13668-68 Steel tubes with inside splines. Range.

GOST 8639-82 Square steel tubes. Range.

GOST 8642-68 Oval steel tubes. Range.

GOST 8644-68 Flat-sided oval steel tubes. Range.

GOST 8645-68 Rectangular steel tubes. Range.

GOST 11681-65 Bended stainless steel tubes. Range.

GOST 11682-65 Bended stainless steel tubes. Technical requirements.

TU 14-3-190-82 SEAMLESS STEEL TUBES FOR ELEVATED TEMPERATURES (10)

TU 14-3-460-74 SEAMLESS STEEL TUBES FOR ELEVATED TEMPERATURES (20)(12H1MF/15HM )

GOST 10192-62 Bimetallic seamless tubes. Range.

GOST 21945-76 Seamless hot-deformed steel tubes made of alloys on the basis of titanium. Technical requirements.

GOST 21729-76 Seamless cold-deformed and hot-deformed tubes made of structural carbon and alloyed steel.

GOST 22786-77 Bimetallic seamless tubes for shipbuilding. Technical requirements

GOST 20295-74 Welded steel tubes for main oil and gas pipelines.

GOST 13663-68 Shaped steel tubes. Technical requirements.

GOST 3664-68 Steel tubes star-shaped. Range.

GOST 13665-68 Corrugated steel tubes. Range.

GOST 13666-68 Many-ribbed steel tubes. Range.

GOST 13667-68 Ribbed steel tubes. Range.

GOST 13668-68 Steel tubes with inside splines. Range.

GOST 8639-82 Square steel tubes. Range.

GOST 8642-68 Oval steel tubes. Range.

GOST 8644-68 Flat-sided oval steel tubes. Range.

GOST 8645-68 Rectangular steel tubes. Range.

GOST 11681-65 Bended stainless steel tubes. Range.

GOST 11682-65 Bended stainless steel tubes. Technical requirements.

TU 14-3-190-82 SEAMLESS STEEL TUBES FOR ELEVATED TEMPERATURES (10)

TU 14-3-460-74 SEAMLESS STEEL TUBES FOR ELEVATED TEMPERATURES (20)(12H1MF/15HM )

AWWA (American Water Works Association)

AWWA C200-97: Steel Water Pipe-6 In. (150 mm) and Larger

AWWA C203-02: Coal-Tar Protective Coatings & Linings for Steel Water Pipelines, Enamel & Tpae, Hot-pap. (Incl. add. C203a-99)

AWWA C205-00: Cement-Mortar Protective Lining and Coating for Steel Water Pipe- 4 In. (100 mm) and Larger-Shop papli

AWWA C206-97: Field Welding of Steel Water Pipe

AWWA C207-01: Steel Pipe Flanges for Waterworks Service- Sizes 4 In. Through 144 In. (100 mm Through 3,600 mm)

AWWA C208-01: Dimensions for Fabricated Steel Water Pipe Fittings

AWWA C209-00: Cold-paplied Tpae Coatings for the Exterior of Special Sections, Connections, and Fittings for Steel Water Pipe

AWWA C210-97: Liquid-Epoxy Coating Systems for the Interior and Exterior of Steel Water Pipelines

AWWA C213-01: Fusion-Bonded Epoxy Coating for the Interior and Exterior of Steel Water Pipelines

AWWA C214-00: Tpae Coating Systems for the Exterior of Steel Water Pipelines

AWWA C215-99: Extruded Polyolefin Coatings for the Exterior of Steel Water Pipelines

AWWA C216-00: Heat-Shrinkable Cross-Linked Polyolefin Coatings for the Exterior of Special Sections, Connections, and Fitting

AWWA C217-99: Cold-paplied Tpae Coatings for Ext. Spec. Sect., Conn., and Fittings for Buried/Submerged Steel Water Pipelines

AWWA C218-02: Coating the Exterior of Aboveground Steel Water Pipelines and Fittings

AWWA C219-01: Bolted, Sleeve-Type Couplings for Plain-End Pipe

AWWA C220-98: Stainless-Steel Pipe, 4 In. (100 mm) and Larger (Includes addendum C220a-99)

AWWA C221-01: Fabricated Steel Mechanical Slip-Type Expansion Joints

AWWA C222-99: Polyurethane Coatings for the Interior and Exterior of Steel Water Pipe and Fittings

AWWA C223-02: Fabricated Steel and Stainless Steel Tpaping Sleeves

AWWA C224-01: Two-layer Nylon-11 Based Polyamide Coating System for Interior and Exterior of Steel Water Pipe and Fittings

AWWA C225-03: Fused Polyolefin Coating Systems for the Exterior of Steel Water Pipelines

SAE(Society of Automative Engineers)

SAE J242a Metric Thread Fuel Injection Tubing Connections

SAE J246 Spherical and Flanged Sleeve (Compression) Tube Fittings

SAE J349 Detection of Surface Imperfections in Ferrous Rods, Bars, tubes, and wires

SAE J356 Welded Flash-Controlled Low-Carbon Steel Tubing Normalized for Bending, Double Flaring, and Beading

SAE J371 Drain, Fill, and Level Plugs for Off-Road, Self-Propelled work machines

SAE J398 Fuel Tank Filler Conditions~Passenger Car, Multi-Purpose passenger vehicles,and Light Duty Trucks

SAE J401 Selection and Use of Steels

SAE J402 SAE Numbering System for Wrought or Rolled Steel

SAE J403 Chemical Compositions of SAE Carbon Steels

SAE J404 Chemical Compositions of SAE Alloy Steels

SAE J405 Chemical Compositions of SAE Wrought Stainless Steels

SAE J406 Methods of Determining Hardenability of Steels

SAE J409 Product Analysis~Permissible Variations from Specified chemical analysis of a Heat or Cast of Steel

SAE J411 Carbon and Alloy Steels

SAE J412 General Characteristics and Heat Treatments of Steels

SAE J413 Mechanical Properties of Heat Treated Wrought Steels

SAE J422 Microscopic Determination of Inclusions in Steels

SAE J424 Method for Determining Breakage Allowances for Sheet Steel

SAE J463 Wrought Copper and Copper Alloys

SAE J476a Dryseal Pipe Threads

SAE J512 Automotive Tube Fittings

SAE J513 Refrigeration Tube Fittings~General Specifications

SAE J514 Hydraulic Tube Fittings : Title: Hydraulic Tube Fittings

SAE J515 Specification For Hydraulic O-Ring Materials, Properties, and Sizes For Metric and Inch Stud Ends, Face Seal Fitting and Four-Screw Flange Tube Connections

SAE J518 Hydraulic Flanged Tube, Pipe, and Hose Connections, Four-Bolt split flange Type :

Title: Hydraulic Flanged Tube, Pipe, and Hose Connections, Four-Bolt split flange Type

SAE J521 Fuel Injection Tubing Connections

SAE J524 Seamless Low-Carbon Steel Tubing Annealed for Bending and flaring

SAE J525 Welded and Cold Drawn Low-Carbon Steel Tubing Annealed for bending and Flaring

SAE J526 Welded Low-Carbon Steel Tubing

SAE J527 Brazed Double Wall Low-Carbon Steel Tubing

SAE J528 Seamless Copper Tube

SAE J529 Fuel Injection Tubing

SAE J530 Automotive Pipe Fittings

SAE J531 Automotive Pipe, Filler, and Drain Plugs : Title: Automotive Pipe, Filler, and Drain Plugs

SAE J533 Flares for Tubing

SAE J534 Lubrication Fittings

SAE J554 Electric Fuses (Cartridge Type)

SAE J562 Nonmetallic Loom

SAE J830 Fuel Injection Equipment Nomenclature

SAE J844 Nonmetallic Air Brake System Tubing

SAE J846 Coding Systems for Identification of Fluid Conductors and Connectors

SAE J926 Hydraulic Pipe Fittings

SAE J935 High Strength Carbon and Alloy Die Drawn Steels

SAE J962 Formed Tube Ends for Hose Connections

SAE J1037 Windshield Washer Tubing

SAE J1047 Tubing-Motor Vehicle Brake System Hydraulic

SAE J1065 Nominal Reference Working Pressures for Steel Hydraulic TubingView Document

SAE J 1086 Numbering Metals and Alloys

SAE J1131 Performance Requirements for SAE J844 Nonmetallic Tubing and Fitting Assemblies Used in Automotive Air Brake Systems

SAE J1140 Filler Pipes and Openings of Motor Vehicle Fuel Tanks

SAE J1149 Metallic Air Brake System Tubing and Pipe

SAE J1207 Measurement Procedure for Determination of Silencer Effectiveness in Reducing Engine Intake or Exhaust Sound Level

SAE J1231 Formed Tube Ends for Hose Connections and Hose Fittings

SAE J1290 Automotive Hydraulic Brake System-Metric Tube Connections

SAE J1394 Metric Nonmetallic Air Brake System Tubing

SAE J1392 Steel, High Strength, Hot Rolled Sheet and Strip, Cold Rolled Sheet, and Coated Sheet

SAE J1418 Fuel Injection Pumps.High Pressure Pipes (Tubing) for Testing

SAE J1442 High-Strength, Hot-Rolled Steel Bars

SAE J1453 Fitting.O-Ring Face Seal

SAE J1611 (R) Operator Controls.Horizontal Earthboring Machines

SAE J1615 Thread Sealants

SAE J1644 Metallic Tube Connections for Fluid Power and General Use-Test Methods for Threaded Hydraulic Fluid Power Connectors

SAE J1650 Seamless Copper-Nickel 90-10 Tubing

SAE J1659 Vehicle Testing Requirements for Replacement Refrigerants for CFC-12 (R-12) Mobile Air-Conditioning Systems

SAE J1677 Tests and Procedures for SAE Low-Carbon Steel and Copper nickel Tubing

SAE J 1684 Test Method for Evaluating the Electrochemical Resistance of Coolant System Hoses and Materials

SAE J1737 Test Procedure to Determine the Hydrocarbon Losses from Fuel Tubes, Hoses, Fittings, and Fuel Line Assemblies by Recirculation

SAE J 1755 Guidelines for Usage of Stainless Steel and Bimetal for exterior automotive Bright Trim

SAE J1781 Materials for Fluid Systems of Marine Vehicles

SAE J1944 Truck and Bus Multipurpose Vehicle Windshield Washer System

SAE J1949 Road Vehicles. High Pressure Fuel Injection Pipe Connections with 60 Degree Female Cone

SAE J1958 Diesel Engines.Steel Tubes for High-Pressure Fuel Injection Pipes (Tubing)

SAE J1991 Standard of Purity for Use in Mobile Air-Conditioning Systems

SAE J2022 Classification, Nomenclature, and Specification Definitions for Horizontal Earthboring Machines

SAE J2027 Standard for Protective Covers for Gasoline Fuel Line Tubing

SAE J2043 Nonmetallic Fuel System Tubing

SAE J2044 Quick Connector Specification for Liquid Fuel and Vapor/Emissions Systems

SAE J2045 Performance Requirements for Fuel System Tubing Assemblies

SAE J2244/1 Connection for Fluid Power and General Use. Ports and Stud Ends with ISO 261 Threads : Part 1 : Port with O-Ring Seal in Truncated Housing

SAE J2244/2 Connection for Fluid Power and General Use. Ports and stud Ends with ISO 261 Threads andand O-Ring Sealing : Part 2 : Heavy-Duty (S Series) Stud Ends. Dimensions, Design, Test Methods, and Requirements

SAE J2254 Fluid Power Piping Cleaning Process

SAE J2260 Nonmetallic Fuel System Tubing with One or More Layers

SAE J2305 Safety for Horizontal Earthboring Machines

SAE J2405 Low-Permeation Fuel Fill and Vent Tube

SAE J2435 Welded Flash Controlled, SAE 1021 Carbon Steel Tubing, Normalized for Bending, Double Flaring, and Beading

SAE J2467 Welded and Cold-Drawn, SAE 1021 Carbon Steel Tubing Normalized for Bending and Flaring

SAE J2494 Push-to-Connect Tube Fittings for Use in the Piping of Vehicular Air Brake

SAE J2494-2 Dimensional Specifications for Non-Metallic Body Push-to- Connect Fittings Used on a Vehicular Air Brake

SAE J2494-3 Performance Requirements for SAE J 844 Non-metallic Air Brake Tubing and Push to Connect Fitting Assemblies Used in Vehicular Air Brake Systems

SAE J2494-4 Cartridge Cavity

SAE J2551 Recommended Practices for Fluid Conductor Metallic Tubing Applications

SAE J2583 Directional Drilling Planning and Mapping Nomenclature

SAE J2599 Fuel Filler Pipe Assembly Design Practice to Meet Low Evaporative Emission Requirements

SAE J2613 Welded Flash Controlled, High Strength Low Alloy Steel Hydraulic Tubing, Sub-Critically Annealed for Bending, Double Flaring, and Bending

SAE J2614 Welded and Cold-Drawn, High Strength Low Alloy Steel Hydraulic Tubing, Sub-Critically Annealed for Bending and Flaring

SAE J2658 Metallic Tube Conductor Assemblies for Fluid Power and General Use~Test Methods for Hydraulic Fluid Power Metallic Tube Assemblies

SAE J24714 Fluid Systems-Connector Tubes~General Specification and Part Standard

GB STANDARD(China Standard)

Seamless Steel Pipe

GB T17395 Seamless Steel Pipe

GB T8162 Structure Pipe 10 20 35 45 40Mn2 45Mn2 27SiMn 20Cr 40Cr 20CrMo 35CrMo 38CrMoA1 50CrV 30CrMnSi

GB T14975 Structure for Stainless seamless Tube mechanical structure,fluid pipeline,passing heat equipment of boiler,heat converter,congealed equipment,catalytic pipeline 0Cr18Ni9 1Cr18Ni9 00Cr19Ni10 0Cr18Ni10Ti 0Cr18Ni11Nb 0Cr17Ni12Mo2 00Cr17Ni14Mo2 0Cr18Ni12Mo2Ti 1Cr18Ni12Mo2Ti 0Cr18Ni12Mo3Ti 1Cr18Ni12Mo3Ti 1Cr18Ni9Ti 0Cr19Ni13Mo3 00Cr19Ni13Mo3 0Cr13 1Cr17 1Cr13 2Cr13

GB T8163 Seamless Pipe For Fluid Pipe 10 20 Q295 Q345

GB T14976 Stainless Seamless Pipe For Fluid Pipe 0Cr18Ni9 00Cr19Ni10 0Cr23Ni13 0Cr25Ni20 0Cr18Ni10Ti 0Cr18Ni11Nb 0Cr17Ni12Mo2 00Cr17Ni14Mo2 0Cr19Ni13Mo3 00Cr19Ni13Mo3 0Cr18Ni12Mo2Ti 1Cr18Ni12Mo2Ti 1Cr18Ni12Mo2Ti 0Cr18Ni12Mo3Ti 1Cr18Ni12Mo3Ti 0Cr18Ni12Mo2Cu2 00Cr18Ni14Mo2Cu2 0Cr13 0Cr26Ni5Mo2

GB T3090 Small Diameter Stainless Steel Pipe 1Cr18Ni9Ti

GB T3089 Stainless-steel super-thin thickness and seamless steel pipe 00Cr18Ni10 1Cr18Ni9Ti 00Cr17Ni14Mo2 1Cr18Ni12Mo2Ti 1Cr18Ni12Mo3Ti

GB T3639 Cold Rolled Precision Seamless Pipe 10 20 35 45 16Mn

GB3094 Cold Rolled Seamless Specials Pipe ( Oval Square Rectangular Hexagon) 10 15 20 25 30 35 40 45 50 09MnV 16Mn 15Mnv

YB T5053 Seamless Pipe For Automotive Bushing 45 45Mn2 40Cr 20CrNi3A

GB T5312 Carbon Steel or Carbon Manganese Steel Seamless Pipe for Ship Building Q320 Q360 Q410 Q460 Q490 Q500 Q510

GB T3093 High Pressure Seamless Pipe For diesel engine 20A

GB T8713 Precision In Diameter Seamless Steel Pipe For Fluid Power Cylinder 10 20 35 45 16Mn

GB T3087 Seamless Steel Pipe For Low and Medium Pressure Boiler 10 20

GB T5130 Seamless Steel Pipe For High Pressure Boiler 20G 20MnG 25MnG 15MoG 20MoG 12CrMoG 15CrMoG 12Cr2MoG 12Cr1MoVG 12Cr2MoWVTiB 12Cr3MoVSiTiB 10Cr9Mo1VNb 1Cr18Ni9 1Cr19Ni11Nb

GB T13296 Stainless Seamless Steel for Boiler and Heat Exchanger Tubes 0Cr18Ni9 1Cr19Ni9 00Cr19Ni10 2Cr23Ni13 0Cr23Ni13 0Cr23Ni13 2Cr25Ni20 0Cr17Ni12Mo2 1Cr17Ni12Mo2 0Cr17Ni14Mo2 0Cr19Ni13Mo3 00Cr19Ni13Mo3 1Cr18Ni9Ti 0Cr18Ni10Ti 1Cr18Ni11Ti 0Cr19Ni11Nb 1Cr19Ni11Nb 0Cr18Ni13Si4 1Cr18Ni12Mo2Ti 0Cr18Ni12Mo2Ti 1Cr18Ni12Mo2Ti 1Cr18Ni12Mo3Ti 0Cr26Ni5Mo2 1Cr17 00Cr27Mo 1Cr25Ti

GB T6479 High Pressure Seamless Pipe For Chemical Fertilizer Equipment High Pressure seamless Pipe for Fertihzer Equipment 10 20G 16Mn 15MnV 10MoWVNb 12CrMo 15CrMo 1Cr5Mo 12Cr2Mo

GB T9948 Seamlesss steel tube for petroleum cracking 10 20 12CrMo 15CrMo 1Cr2Mo 1Cr5Mo 1Cr19Ni9 1Cr19Ni11Nb

YB T5052 Geological Drilling Pipe Seamless Pipe For Diamond Core Boring
  DZ65-27MnMoVB

GB T17396 Hot Rolled Seamless Pipe For
  Hydraulic Cylinder   20 35 45 27SiMn 30MnNbRE

BQB 232 Tubes for Perforating Gun

WELDED PIPE

GB T13793 Buttweld Electric Resistance Welded Pipe
  08F 08 10F 10 15F 15 20 Q195 Q195A Q195B Q235A Q235B

GB 11258 Fluoride Resin Coated Double Wall Steel Pipes for Automobiles
  08 08F 08A1

GB T3091 Welded Pipe And For the Low Pressure Fluids & Galvanized
Zinc Coated Welded Pipe And For the Low Pressure Fluids   Q195 Q215 Q235A

GB T3092 Welded Pipe And For the Low Pressure Fluids & Galvanized
Zinc Coated Welded Pipe And For the Low Pressure Fluids Q195 Q215 Q235A

GB T14980 Large Diameter Electric Welded For the Low Pressure Fluids For the Low Pressure Fluids Q215 Q235A Q235B

GB T12771 Stainless Steel Welded Pipe For the Low Pressure Fluids 1Cr18Ni9 0Cr19Ni9 0Cr19Ni11 0Cr25Ni20 0Cr17Ni12Mo2 00Cr17Ni14Mo2 0Cr18Ni11Ti 0Cr18Ni11Nb 00Cr17 00Cr18Mo2 0Cr13

YB T4102 Welded Pipe For the Low Pressure Fluids For Low and Middle Boiler
  10   20

YB 4103 Carbon Steel Tubes for Boiler and Heat Exchaner 10

YB T5209 Electric Resistance Welded Steel Pipe For Power Transmission Shaft
  08Z 15TiZ 20Z 25Z

GB T12700 Stainless Steel Welded Pipe For Machine Structural Purposed 00Cr19Ni11 00Cr17Ni14Mo2 0Cr19Ni9 1Cr18Ni9 1Cr18Ni9Ti 0Cr17Ni12Mo2 0Cr18Ni11Nb 0Cr25Ni20 1Cr17 1Cr15 0Cr13 1Cr13

GB T13792 Electric Welded Steel Pipe For Conveyor Support
  Q215   Q235

YB T4028 Pump Electric Welded Steel Pipe For Deep Subsurface Water

GB T14291 Electric Welded Steel Pipe For Mining Fluid
  Q235A   Q235B

GB T3640 General Carbon Conduits Pipe Clip

GB T3641 P3 Zinc Coated Metal Smoke Tube

GB T3642 S type brazed Stainless Metal Smoke Tube
  1Cr18Ni9Ti

SGG262 Cold Rolled Minute Steel Pipe for Automobile, and Shock Absorber of Motorcycle 10 20 35 45

Others

EDM Electrode Tubes

STAINLESS HOLLOW BAR

DUPLEX STAINLESS STEEL PIPE

AS 1074 STEEL TUBES AND TUBULARS FOR ORDINARY SERVICE

AS 1163 STRUCTURAL STEEL HOLLOW SECTIONS

UL 6 RIGID METAL CONDUIT

ANSI C80.1 RIGID METAL CONDUIT

CSA C22.2 RIGID METAL CONDUIT

S45C PIPE (Carbon Steel for Machine Structural Use PIPE)

HR PIPE (Hot Rolled Pipe)

CR PIPE (Cold Rolled Pipe)

CGI PIPE (Cold Rolled GalvanIzed Iron Pipe)

HGI PIPE (Hot Rolled GalvanIzed Iron Pipe)

 
 

 

ASTM B1-01(2007) Standard Specification for Hard-Drawn Copper Wire
ASTM B2-00(2005)e1 Standard Specification for Medium-Hard-Drawn Copper Wire
ASTM B3-01(2007) Standard Specification for Soft or Annealed Copper Wire
ASTM B5-00(2005) Standard Specification for High Conductivity Tough-Pitch Copper Refinery Shapes
ASTM B6-07 Standard Specification for Zinc
ASTM B8-04 Standard Specification for Concentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard, or Soft
ASTM B9-90(2003) Standard Specification for Bronze Trolley Wire
ASTM B16/B16M-05 Standard Specification for Free-Cutting Brass Rod, Bar and Shapes for Use in Screw Machines
ASTM B19-05 Standard Specification for Cartridge Brass Sheet, Strip, Plate, Bar, and Disks
ASTM B21/B21M-06 Standard Specification for Naval Brass Rod, Bar, and Shapes
ASTM B22-02 Standard Specification for Bronze Castings for Bridges and Turntables
ASTM B23-00(2005) Standard Specification for White Metal Bearing Alloys (Known Commercially as "Babbitt Metal")
ASTM B26/B26M-05 Standard Specification for Aluminum-Alloy Sand Castings
ASTM B29-03 Standard Specification for Refined Lead
ASTM B30-06a Standard Specification for Copper Alloys in Ingot Form
ASTM B32-04 Standard Specification for Solder Metal
ASTM B33-04 Standard Specification for Tinned Soft or Annealed Copper Wire for Electrical Purposes
ASTM B36/B36M-06 Standard Specification for Brass Plate, Sheet, Strip, And Rolled Bar
ASTM B37-03 Standard Specification for Aluminum for Use in Iron and Steel Manufacture
ASTM B39-79(2004) Standard Specification for Nickel
ASTM B42-02e1 Standard Specification for Seamless Copper Pipe, Standard Sizes
ASTM B43-98(2004) Standard Specification for Seamless Red Brass Pipe, Standard Sizes
ASTM B47-95a(2007) Standard Specification for Copper Trolley Wire
ASTM B48-00(2005)e1 Standard Specification for Soft Rectangular and Square Bare Copper Wire for Electrical Conductors
ASTM B49-98(2004) Standard Specification for Copper Rod Drawing Stock for Electrical Purposes
ASTM B61-02 Standard Specification for Steam or Valve Bronze Castings
ASTM B62-02 Standard Specification for Composition Bronze or Ounce Metal Castings
ASTM B63-07 Standard Test Method for Resistivity of Metallically Conducting Resistance and Contact Materials
ASTM B66/B66M-06 Standard Specification for Bronze Castings for Steam Locomotive Wearing Parts
ASTM B67-05 Standard Specification for Car and Tender Journal Bearings, Lined
ASTM B68-02 Standard Specification for Seamless Copper Tube, Bright Annealed
ASTM B68M-99(2005) Standard Specification for Seamless Copper Tube, Bright Annealed [Metric]
ASTM B69-01a(2005) Standard Specification for Rolled Zinc
ASTM B70-90(2007) Standard Test Method for Change of Resistance With Temperature of Metallic Materials for Electrical Heating
ASTM B75-02 Standard Specification for Seamless Copper Tube
ASTM B75M-99(2005) Standard Specification for Seamless Copper Tube [Metric]
ASTM B76-90(2007) Standard Test Method for Accelerated Life of Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating
ASTM B77-07 Standard Test Method for Thermoelectric Power of Electrical-Resistance Alloys
ASTM B78-90(2007) Standard Test Method of Accelerated Life of Iron-Chromium-Aluminum Alloys for Electrical Heating
ASTM B80-07 Standard Specification for Magnesium-Alloy Sand Castings
ASTM B84-07 Standard Test Method for Temperature-Resistance Constants of Alloy Wires for Precision Resistors
ASTM B85-03 Standard Specification for Aluminum-Alloy Die Castings
ASTM B86-06 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloy Foundry and Die Castings
ASTM B88-03 Standard Specification for Seamless Copper Water Tube
ASTM B88M-05 Standard Specification for Seamless Copper Water Tube [Metric]
ASTM B90/B90M-07 Standard Specification for Magnesium-Alloy Sheet and Plate
ASTM B91-07 Standard Specification for Magnesium-Alloy Forgings
ASTM B92/B92M-07 Standard Specification for Unalloyed Magnesium Ingot and Stick For Remelting
ASTM B93/B93M-07 Standard Specification for Magnesium Alloys in Ingot Form for Sand Castings, Permanent Mold Castings, and Die Castings
ASTM B94-07 Standard Specification for Magnesium-Alloy Die Castings
ASTM B96/B96M-06 Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels
ASTM B98/B98M-03 Standard Specification for Copper-Silicon Alloy Rod, Bar and Shapes
ASTM B99/B99M-06 Standard Specification for Copper-Silicon Alloy Wire for General Applications
ASTM B100-03a Standard Specification for Wrought Copper-Alloy Bearing and Expansion Plates and Sheets for Bridge and Other Structural Use
ASTM B101-07 Standard Specification for Lead-Coated Copper Sheet and Strip for Building Construction
ASTM B102-00(2005) Standard Specification for Lead- and Tin-Alloy Die Castings
ASTM B103/B103M-07 Standard Specification for Phosphor Bronze Plate, Sheet, Strip, and Rolled Bar
ASTM B105-05 Standard Specification for Hard-Drawn Copper Alloy Wires for Electric Conductors
ASTM B106-96(2002)e1 Standard Test Methods for Flexivity of Thermostat Metals
ASTM B107/B107M-07 Standard Specification for Magnesium-Alloy Extruded Bars, Rods, Profiles, Tubes, and Wire
ASTM B108-06 Standard Specification for Aluminum-Alloy Permanent Mold Castings
ASTM B111/B111M-04 Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock
ASTM B114-07 Standard Test Method for Temperature-Resistance Constants of Sheet Materials for Shunts and Precision Resistors
ASTM B115-00(2004) Standard Specification for Electrolytic Copper Cathode
ASTM B116-95(2007) Standard Specification for Figure-9 Deep-Grooved and Figure-8 Copper Trolly Wire for Industrial Haulage
ASTM B117-07 Standard Practice for Operating Salt Spray (Fog) Apparatus
ASTM B121/B121M-01(2006) Standard Specification for Leaded Brass Plate, Sheet, Strip, and Rolled Bar
ASTM B122/B122M-06 Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip, and Rolled Bar
ASTM B124/B124M-06 Standard Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes
ASTM B127-05 Standard Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, and Strip
ASTM B129-07 Standard Specification for Cartridge Brass Cartridge Case Cups
ASTM B130-02 Standard Specification for Commercial Bronze Strip for Bullet Jackets
ASTM B131-07 Standard Specification for Copper Alloy Bullet Jacket Cups
ASTM B134/B134M-05 Standard Specification for Brass Wire
ASTM B135-02 Standard Specification for Seamless Brass Tube
ASTM B135M-00(2006) Standard Specification for Seamless Brass Tube [Metric]
ASTM B136-84(2003) Standard Method for Measurement of Stain Resistance of Anodic Coatings on Aluminum
ASTM B137-95(2004) Standard Test Method for Measurement of Coating Mass Per Unit Area on Anodically Coated Aluminum
ASTM B138/B138M-06 Standard Specification for Manganese Bronze Rod, Bar, and Shapes
ASTM B139/B139M-07 Standard Specification for Phosphor Bronze Rod, Bar, and Shapes
ASTM B140/B140M-07 Standard Specification for Copper-Zinc-Lead (Red Brass or Hardware Bronze) Rod, Bar, and Shapes
ASTM B148-97(2003)e1 Standard Specification for Aluminum-Bronze Sand Castings
ASTM B150/B150M-03 Standard Specification for Aluminum Bronze Rod, Bar, and Shapes
ASTM B151/B151M-05 Standard Specification for Copper-Nickel-Zinc Alloy (Nickel Silver) and Copper-Nickel Rod and Bar
ASTM B152/B152M-06a Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar
ASTM B153-05 Standard Test Method for Expansion (Pin Test) of Copper and Copper-Alloy Pipe and Tubing
ASTM B154-05 Standard Test Method for Mercurous Nitrate Test for Copper Alloys
ASTM B159/B159M-05 Standard Specification for Phosphor Bronze Wire
ASTM B160-05 Standard Specification for Nickel Rod and Bar
ASTM B161-05 Standard Specification for Nickel Seamless Pipe and Tube
ASTM B162-99(2005) Standard Specification for Nickel Plate, Sheet, and Strip
ASTM B163-04 Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes
ASTM B164-03 Standard Specification for Nickel-Copper Alloy Rod, Bar, and Wire
ASTM B165-05 Standard Specification for Nickel-Copper Alloy (UNS N04400)* Seamless Pipe and Tube
ASTM B166-06 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, and N06045)* and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Rod, Bar, and Wire
ASTM B167-06 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, and N06045)* and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Seamless Pipe and Tube
ASTM B168-06 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, and N06045) and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Plate, Sheet, and Strip
ASTM B169/B169M-05 Standard Specification for Aluminum Bronze Sheet, Strip, and Rolled Bar
ASTM B170-99(2004) Standard Specification for Oxygen-Free Electrolytic Copper—Refinery Shapes
ASTM B171/B171M-04e1 Standard Specification for Copper-Alloy Plate and Sheet for Pressure Vessels, Condensers, and Heat Exchangers
ASTM B172-01a(2007)e1 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Members, for Electrical Conductors
ASTM B173-01a(2007)e1 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Concentric-Stranded Members, for Electrical Conductors
ASTM B174-02(2007)e1 Standard Specification for Bunch-Stranded Copper Conductors for Electrical Conductors
ASTM B176-04 Standard Specification for Copper-Alloy Die Castings
ASTM B177-01(2006)e1 Standard Guide for Engineering Chromium Electroplating
ASTM B179-06 Standard Specification for Aluminum Alloys in Ingot and Molten Forms for Castings from All Casting Processes
ASTM B183-79(2004)e1 Standard Practice for Preparation of Low-Carbon Steel for Electroplating
ASTM B187/B187M-06 Standard Specification for Copper, Bus Bar, Rod, and Shapes and General Purpose Rod, Bar, and Shapes
ASTM B188-02 Standard Specification for Seamless Copper Bus Pipe and Tube
ASTM B189-05 Standard Specification for Lead-Coated and Lead-Alloy-Coated Soft Copper Wire for Electrical Purposes
ASTM B193-02 Standard Test Method for Resistivity of Electrical Conductor Materials
ASTM B194-01e1 Standard Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar
ASTM B196/B196M-07 Standard Specification for Copper-Beryllium Alloy Rod and Bar
ASTM B197/B197M-07 Standard Specification for Copper-Beryllium Alloy Wire
ASTM B199-07 Standard Specification for Magnesium-Alloy Permanent Mold Castings
ASTM B200-85(2004) Standard Specification for Electrodeposited Coatings of Lead and Lead-Tin Alloys on Steel and Ferrous Alloys
ASTM B201-80(2004) Standard Practice for Testing Chromate Coatings on Zinc and Cadmium Surfaces
ASTM B206/B206M-07 Standard Specification for Copper-Nickel-Zinc (Nickel Silver) Wire and Copper-Nickel Alloy Wire
ASTM B208-06 Standard Practice for Preparing Tension Test Specimens for Copper Alloy Sand, Permanent Mold, Centrifugal, and Continuous Castings
ASTM B209-07 Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
ASTM B209M-07 Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate [Metric]
ASTM B210-04 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes
ASTM B210M-05 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes [Metric]
ASTM B211-03 Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire
ASTM B211M-03 Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire [Metric]
ASTM B212-99(2006) Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel
ASTM B213-03 Standard Test Method for Flow Rate of Metal Powders
ASTM B214-07 Standard Test Method for Sieve Analysis of Metal Powders
ASTM B215-04 Standard Practices for Sampling Metal Powders
ASTM B216-97(2003) Standard Specification for Tough-Pitch Fire-Refined Copper—Refinery Shapes
ASTM B221-06 Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
ASTM B221M-07 Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes [Metric]
ASTM B223-03 Standard Test Method for Modulus of Elasticity of Thermostat Metals (Cantilever Beam Method)
ASTM B224-04 Standard Classification of Coppers
ASTM B226-04 Standard Specification for Cored, Annular, Concentric-Lay-Stranded Copper Conductors
ASTM B227-04 Standard Specification for Hard-Drawn Copper-Clad Steel Wire
ASTM B228-04 Standard Specification for Concentric-Lay-Stranded Copper-Clad Steel Conductors
ASTM B229-04 Standard Specification for Concentric-Lay-Stranded Copper and Copper-Clad Steel Composite Conductors
ASTM B230/B230M-07 Standard Specification for Aluminum 1350-H19 Wire for Electrical Purposes
ASTM B231/B231M-04 Standard Specification for Concentric-Lay-Stranded Aluminum 1350 Conductors
ASTM B232/B232M-01e1 Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Reinforced (ACSR)
ASTM B233-97(2007) Standard Specification for Aluminum 1350 Drawing Stock for Electrical Purposes
ASTM B234-04 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers
ASTM B234M-04 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers [Metric]
ASTM B236M-07 Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars) [Metric]
ASTM B236-07 Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars)
ASTM B237-01(2006) Standard Specification for Refined Antimony
ASTM B240-07 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloys in Ingot Form for Foundry and Die Castings
ASTM B241/B241M-02 Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube
ASTM B242-99(2004)e1 Standard Guide for Preparation of High-Carbon Steel for Electroplating
ASTM B243-06 Standard Terminology of Powder Metallurgy
ASTM B244-97(2002) Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments
ASTM B246-05 Standard Specification for Tinned Hard-Drawn and Medium-Hard-Drawn Copper Wire for Electrical Purposes
ASTM B247-02a Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings
ASTM B247M-02a Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings [Metric]
ASTM B248-07 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar
ASTM B248M-07 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar [Metric]
ASTM B249/B249M-06 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings
ASTM B250/B250M-07 Standard Specification for General Requirements for Wrought Copper Alloy Wire
ASTM B251M-97(2003) Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube [Metric]
ASTM B251-02e1 Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube
ASTM B252-92(2004) Standard Guide for Preparation of Zinc Alloy Die Castings for Electroplating and Conversion Coatings
ASTM B253-87(2005)e1 Standard Guide for Preparation of Aluminum Alloys for Electroplating
ASTM B254-92(2004)e1 Standard Practice for Preparation of and Electroplating on Stainless Steel
ASTM B258-02 Standard Specification for Standard Nominal Diameters and Cross-Sectional Areas of AWG Sizes of Solid Round Wires Used as Electrical Conductors
ASTM B263-04 Standard Test Method for Determination of Cross-Sectional Area of Stranded Conductors
ASTM B265-06b Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
ASTM B267-07 Standard Specification for Wire for Use In Wire-Wound Resistors
ASTM B271-06 Standard Specification for Copper-Base Alloy Centrifugal Castings
ASTM B272-07 Standard Specification for Copper Flat Products with Finished (Rolled or Drawn) Edges (Flat Wire and Strip)
ASTM B275-05 Standard Practice for Codification of Certain Nonferrous Metals and Alloys, Cast and Wrought
ASTM B276-05e1 Standard Test Method for Apparent Porosity in Cemented Carbides
ASTM B277-95(2006) Standard Test Method for Hardness of Electrical Contact Materials
ASTM B279-04 Standard Test Method for Stiffness of Bare Soft Square and Rectangular Copper and Aluminum Wire for Magnet Wire Fabrication
ASTM B280-03 Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service
ASTM B281-88(2001) Standard Practice for Preparation of Copper and Copper-Base Alloys for Electroplating and Conversion Coatings
ASTM B283-06 Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed)
ASTM B286-07 Standard Specification for Copper Conductors for Use in Hookup Wire for Electronic Equipment
ASTM B294-92(2006) Standard Test Method for Hardness Testing of Cemented Carbides
ASTM B296-03 Standard Practice for Temper Designations of Magnesium Alloys, Cast and Wrought
ASTM B298-07 Standard Specification for Silver-Coated Soft or Annealed Copper Wire
ASTM B299-01 Standard Specification for Titanium Sponge
ASTM B301/B301M-04 Standard Specification for Free-Cutting Copper Rod, Bar, Wire and Shapes
ASTM B302-07 Standard Specification for Threadless Copper Pipe, Standard Sizes
ASTM B306-02 Standard Specification for Copper Drainage Tube (DWV)
ASTM B308/B308M-02 Standard Specification for Aluminum-Alloy 6061-T6 Standard Structural Profiles
ASTM B311-93(2002)e1 Test Method for Density Determination for Powder Metallurgy (P/M) Materials Containing Less Than Two Percent Porosity
ASTM B312-96(2002) Standard Test Method for Green Strength for Compacted Metal Powder Specimens
ASTM B313/B313M-02e1 Standard Specification for Aluminum and Aluminum-Alloy Round Welded Tubes
ASTM B315-06 Standard Specification for Seamless Copper Alloy Pipe and Tube
ASTM B316/B316M-02 Standard Specification for Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods
ASTM B317/B317M-07 Standard Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, Structural Profiles, and Profiles for Electrical Purposes (Bus Conductor)
ASTM B319-91(2004) Standard Guide for Preparation of Lead and Lead Alloys for Electroplating
ASTM B320-60(2003)e1 Standard Practice for Preparation of Iron Castings for Electroplating
ASTM B322-99(2004) Standard Guide for Cleaning Metals Prior to Electroplating
ASTM B324-01(2007) Standard Specification for Aluminum Rectangular and Square Wire for Electrical Purposes
ASTM B327-01(2005) Standard Specification for Master Alloys Used in Making Zinc Die Casting Alloys
ASTM B328-96(2003)e1 Standard Test Method for Density, Oil Content, and Interconnected Porosity of Sintered Metal Structural Parts and Oil-Impregnated Bearings
ASTM B329-06 Standard Test Method for Apparent Density of Metal Powders and Compounds Using the Scott Volumeter
ASTM B330-07 Standard Test Method for Fisher Number of Metal Powders and Related Compounds
ASTM B331-95(2002) Standard Test Method for Compressibility of Metal Powders in Uniaxial Compaction
ASTM B333-03 Standard Specification for Nickel-Molybdenum Alloy Plate, Sheet, and Strip
ASTM B335-03 Standard Specification for Nickel-Molybdenum Alloy Rod
ASTM B338-06a Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers
ASTM B339-00(2005) Standard Specification for Pig Tin
ASTM B343-92a(2004)e1 Standard Practice for Preparation of Nickel for Electroplating with Nickel
ASTM B344-01 Standard Specification for Drawn or Rolled Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating Elements
ASTM B345/B345M-02 Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube for Gas and Oil Transmission and Distribution Piping Systems
ASTM B348-06a Standard Specification for Titanium and Titanium Alloy Bars and Billets
ASTM B349/B349M-03 Standard Specification for Zirconium Sponge and Other Forms of Virgin Metal for Nuclear Application
ASTM B350/B350M-02(2006) Standard Specification for Zirconium and Zirconium Alloy Ingots for Nuclear Application
ASTM B351/B351M-07 Standard Specification for Hot-Rolled and Cold-Finished Zirconium and Zirconium Alloy Bars, Rod, and Wire for Nuclear Application
ASTM B352/B352M-02(2006) Standard Specification for Zirconium and Zirconium Alloy Sheet, Strip, and Plate for Nuclear Application
ASTM B353-07 Standard Specification for Wrought Zirconium and Zirconium Alloy Seamless and Welded Tubes for Nuclear Service (Except Nuclear Fuel Cladding)
ASTM B354-05 Standard Terminology Relating to Uninsulated Metallic Electrical Conductors
ASTM B355-06 Standard Specification for Nickel-Coated Soft or Annealed Copper Wire
ASTM B359/B359M-02(2006) Standard Specification for Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes With Integral Fins
ASTM B360-01 Standard Specification for Hard-Drawn Copper Capillary Tube for Restrictor Applications
ASTM B361-02 Standard Specification for Factory-Made Wrought Aluminum and Aluminum-Alloy Welding Fittings
ASTM B362-91(2003) Standard Test Method for Mechanical Torque Rate of Spiral Coils of Thermostat Metal
ASTM B363-06a Standard Specification for Seamless and Welded Unalloyed Titanium and Titanium Alloy Welding Fittings
ASTM B364-96(2002) Standard Specification for Tantalum and Tantalum Alloy Ingots
ASTM B365-98(2004) Standard Specification for Tantalum and Tantalum Alloy Rod and Wire
ASTM B366-04be1 Standard Specification for Factory-Made Wrought Nickel and Nickel Alloy Fittings
ASTM B367-06 Standard Specification for Titanium and Titanium Alloy Castings
ASTM B368-97(2003)e1 Standard Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test)
ASTM B369-06 Standard Specification for Copper-Nickel Alloy Castings
ASTM B370-03 Standard Specification for Copper Sheet and Strip for Building Construction
ASTM B371/B371M-06 Standard Specification for Copper-Zinc-Silicon Alloy Rod
ASTM B372-97(2003) Standard Specification for Seamless Copper and Copper-Alloy Rectangular Waveguide Tube
ASTM B373-00(2006) Standard Specification for Aluminum Foil for Capacitors
ASTM B374-06 Standard Terminology Relating to Electroplating
ASTM B379-04 Standard Specification for Phosphorized Coppers—Refinery Shapes
ASTM B380-97(2007) Standard Test Method of Corrosion Testing of Decorative Electrodeposited Coatings by the Corrodkote Procedure
ASTM B381-06a Standard Specification for Titanium and Titanium Alloy Forgings
ASTM B386-03 Standard Specification for Molybdenum and Molybdenum Alloy Plate, Sheet, Strip, and Foil
ASTM B387-90(2001) Standard Specification for Molybdenum and Molybdenum Alloy Bar, Rod, and Wire
ASTM B388-06 Standard Specification for Thermostat Metal Sheet and Strip
ASTM B389-81(2004) Standard Test Method for Thermal Deflection Rate of Spiral and Helical Coils of Thermostat Metal
ASTM B390-92(2006) Standard Practice for Evaluating Apparent Grain Size and Distribution of Cemented Tungsten Carbides
ASTM B391-03 Standard Specification for Niobium and Niobium Alloy Ingots
ASTM B392-03 Standard Specification for Niobium and Niobium Alloy Bar, Rod, and Wire
ASTM B393-05 Standard Specification for Niobium and Niobium Alloy Strip, Sheet, and Plate
ASTM B394-03 Standard Specification for Niobium and Niobium Alloy Seamless and Welded Tubes
ASTM B395/B395M-02 Standard Specification for U-Bend Seamless Copper and Copper Alloy Heat Exchanger and Condenser Tubes
ASTM B398/B398M-02(2007) Standard Specification for Aluminum-Alloy 6201-T81 Wire for Electrical Purposes
ASTM B399/B399M-04 Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy 6201-T81 Conductors
ASTM B400-04 Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum 1350 Conductors
ASTM B401-04 Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced (ACSR/COMP)
ASTM B403-07 Standard Specification for Magnesium-Alloy Investment Castings
ASTM B406-96(2005) Standard Test Method for Transverse Rupture Strength of Cemented Carbides
ASTM B407-04 Standard Specification for Nickel-Iron-Chromium Alloy Seamless Pipe and Tube
ASTM B408-06 Standard Specification for Nickel-Iron-Chromium Alloy Rod and Bar
ASTM B409-06e1 Standard Specification for Nickel-Iron-Chromium Alloy Plate, Sheet, and Strip
ASTM B411/B411M-06 Standard Specification for Copper-Nickel-Silicon Alloy Rod and Bar
ASTM B413-97a(2003) Standard Specification for Refined Silver
ASTM B415-98(2007) Standard Specification for Hard-Drawn Aluminum-Clad Steel Wire
ASTM B416-98(2007) Standard Specification for Concentric-Lay-Stranded Aluminum-Clad Steel Conductors
ASTM B417-00(2006)e1 Standard Test Method for Apparent Density of Non-Free-Flowing Metal Powders Using the Carney Funnel
ASTM B418-06 Standard Specification for Cast and Wrought Galvanic Zinc Anodes
ASTM B422-06 Standard Specification for Copper-Aluminum-Silicon-Cobalt Alloy, Copper-Nickel-Silicon-Magnesium Alloy, Copper-Nickel-Silicon Alloy, Copper-Nickel-Aluminum-Magnesium Alloy, and Copper-Nickel-Tin Alloy Sheet and Strip
ASTM B423-05 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825 and N08221)* Seamless Pipe and Tube
ASTM B424-05 Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 and UNS N08221)* Plate, Sheet, and Strip
ASTM B425-99(2005) Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 and UNS N08221) Rod and Bar
ASTM B427-02 Standard Specification for Gear Bronze Alloy Castings
ASTM B428-93(2004) Standard Test Method for Angle of Twist in Rectangular and Square Copper and Copper Alloy Tube
ASTM B429/B429M-06 Standard Specification for Aluminum-Alloy Extruded Structural Pipe and Tube
ASTM B430-97(2006)e1 Standard Test Method for Particle Size Distribution of Refractory Metal Powders and Related Compounds by Turbidimetry
ASTM B432-04 Standard Specification for Copper and Copper Alloy Clad Steel Plate
ASTM B434-06 Standard Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, UNS N10242)* Plate, Sheet, and Strip
ASTM B435-06 Standard Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Plate, Sheet, and Strip
ASTM B438/B438M-05 Specification for Bronze Powder Metallurgy (P/M) Bearing (Oil-Impregnated)
ASTM B439-07 Standard Specification for Iron-Base Powder Metallurgy (PM) Bearings (Oil Impregnated)
ASTM B440-00(2005) Standard Specification for Cadmium
ASTM B441-04 Standard Specification for Copper-Cobalt-Beryllium, Copper-Nickel-Beryllium, and Copper-Nickel-Lead-Beryllium Rod and Bar (UNS Nos. C17500, C17510, and C17465)
ASTM B443-00(2005) Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219)* Plate, Sheet, and Strip
ASTM B444-06 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625 and UNS N06852) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219) Pipe and Tube
ASTM B446-03 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625), Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219), and Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06650)* Rod and Bar
ASTM B447-07 Standard Specification for Welded Copper Tube
ASTM B449-93(2004) Standard Specification for Chromates on Aluminum
ASTM B452-02 Standard Specification for Copper-Clad Steel Wire for Electronic Application
ASTM B453/B453M-05 Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Rod, Bar, and Shapes
ASTM B455-05 Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Extruded Shapes
ASTM B456-03 Standard Specification for Electrodeposited Coatings of Copper Plus Nickel Plus Chromium and Nickel Plus Chromium
ASTM B457-67(2003) Standard Test Method for Measurement of Impedance of Anodic Coatings on Aluminum
ASTM B462-06 Specification for Forged or Rolled UNS N06030,N06022,N06035,N06200,N06059,N06686,N08020,N08024,N08026,N08367,N10276,N10665, N10675,N10629, N08031,N06045, N06025, & R20033 Alloy Pipe Flanges, Forged Fitting, & Values & Parts for Corrosive
ASTM B463-04 Standard Specification for UNS N08020, UNS N08026, and UNS N08024 Alloy Plate, Sheet, and Strip
ASTM B464-05 Standard Specification for Welded UNS N08020, N08024, and N08026 Alloy Pipe
ASTM B465-04 Standard Specification for Copper-Iron Alloy Plate, Sheet, Strip, and Rolled Bar
ASTM B466/B466M-07 Standard Specification for Seamless Copper-Nickel Pipe and Tube
ASTM B467-88(2003) Standard Specification for Welded Copper-Nickel Pipe
ASTM B468-04 Standard Specification for Welded UNS N08020, N08024, and N08026 Alloy Tubes
ASTM B470-02(2007) Standard Specification for Bonded Copper Conductors for Use in Hookup Wires for Electronic Equipment
ASTM B472-04a Standard Specification for Nickel Alloy Billets and Bars for Reforging
ASTM B473-07 Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Bar and Wire
ASTM B474-03 Standard Specification for Electric Fusion Welded Nickel and Nickel Alloy Pipe
ASTM B475-07 Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Round Weaving Wire
ASTM B476-01(2006) Standard Specification for General Requirements for Wrought Precious Metal Electrical Contact Materials
ASTM B477-97(2002) Standard Specification for Gold-Silver-Nickel Electrical Contact Alloy
ASTM B478-85(2003) Standard Test Method for Cross Curvature of Thermostat Metals
ASTM B479-06 Standard Specification for Annealed Aluminum and Aluminum-Alloy Foil for Flexible Barrier, Food Contact, and Other Applications
ASTM B480-88(2006) Standard Guide for Preparation of Magnesium and Magnesium Alloys for Electroplating
ASTM B481-68(2003)e1 Standard Practice for Preparation of Titanium and Titanium Alloys for Electroplating
ASTM B482-85(2003) Standard Practice for Preparation of Tungsten and Tungsten Alloys for Electroplating
ASTM B483/B483M-03 Standard Specification for Aluminum and Aluminum-Alloy Drawn Tubes for General Purpose Applications
ASTM B487-85(2007) Standard Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of a Cross Section
ASTM B488-01(2006) Standard Specification for Electrodeposited Coatings of Gold for Engineering Uses
ASTM B489-85(2003) Standard Practice for Bend Test for Ductility of Electrodeposited and Autocatalytically Deposited Metal Coatings on Metals
ASTM B490-92(2003) Standard Practice for Micrometer Bend Test for Ductility of Electrodeposits
ASTM B491/B491M-06 Standard Specification for Aluminum and Aluminum-Alloy Extruded Round Tubes for General-Purpose Applications
ASTM B493-01(2003) Standard Specification for Zirconium and Zirconium Alloy Forgings
ASTM B494/B494M-03 Standard Specification for Primary Zirconium
ASTM B495-05 Standard Specification for Zirconium and Zirconium Alloy Ingots
ASTM B496-04 Standard Specification for Compact Round Concentric-Lay-Stranded Copper Conductors
ASTM B497-00(2006) Standard Guide for Measuring Voltage Drop on Closed Arcing Contacts
ASTM B498/B498M-98(2002) Standard Specification for Zinc-Coated (Galvanized) Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR)
ASTM B499-96(2002) Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals
ASTM B500/B500M-98(2002) Standard Specification for Metallic Coated Stranded Steel Core for Aluminum Conductors, Steel Reinforced (ACSR)
ASTM B501-04 Standard Specification for Silver-Coated, Copper-Clad Steel Wire for Electronic Application
ASTM B502-02(2007) Standard Specification for Aluminum-Clad Steel Core Wire for Aluminum Conductors, Aluminum-Clad Steel Reinforced
ASTM B504-90(2007) Standard Test Method for Measurement of Thickness of Metallic Coatings by the Coulometric Method
ASTM B505/B505M-07 Standard Specification for Copper Alloy Continuous Castings
ASTM B507-86(2003) Standard Practice for Design of Articles To Be Electroplated on Racks
ASTM B508-07 Standard Specification for Copper Alloy Strip for Flexible Metal Hose
ASTM B511-01(2005) Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Bars and Shapes
ASTM B512-04 Standard Specification for Nickel-Chromium-Silicon Alloy (UNS N08330) Billets and Bars
ASTM B514-05 Standard Specification for Welded Nickel-Iron-Chromium Alloy Pipe
ASTM B515-95(2002) Standard Specification for Welded UNS N08120, UNS N08800, UNS N08810, and UNS N08811 Alloy Tubes
ASTM B516-03 Standard Specification for Welded Nickel-Chromium-Iron Alloy (UNS N06600, UNS N06603, UNS N06025, and UNS N06045 Tubes
ASTM B517-05 Standard Specification for Welded Nickel-Chromium-Iron-Alloy (UNS N06600, UNS N06603, UNS N06025, and UNS N06045) Pipe
ASTM B520-93(2007) Standard Specification for Tin-Coated, Copper-Clad Steel Wire for Electronic Application
ASTM B521-98(2004) Standard Specification for Tantalum and Tantalum Alloy Seamless and Welded Tubes
ASTM B522-01(2006) Standard Specification for Gold-Silver-Platinum Electrical Contact Alloy
ASTM B523/B523M-07 Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Tubes
ASTM B524/B524M-99(2005) Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Alloy Reinforced (ACAR, 1350/6201)
ASTM B527-06 Standard Test Method for Determination of Tap Density of Metallic Powders and Compounds
ASTM B528-05 Standard Test Method for Transverse Rupture Strength of Metal Powder Specimens
ASTM B530-02 Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Electrodeposited Nickel Coatings on Magnetic and Nonmagnetic Substrates
ASTM B532-85(2007) Standard Specification for Appearance of Electroplated Plastic Surfaces
ASTM B533-85(2004) Standard Test Method for Peel Strength of Metal Electroplated Plastics
ASTM B534-07 Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar
ASTM B535-06 Standard Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Seamless Pipe and Tube
ASTM B536-07 Standard Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Plate, Sheet, and Strip
ASTM B537-70(2007) Standard Practice for Rating of Electroplated Panels Subjected to Atmospheric Exposure
ASTM B539-02e1 Standard Test Methods for Measuring Resistance of Electrical Connections (Static Contacts)
ASTM B540-97(2002) Standard Specification for Palladium Electrical Contact Alloy
ASTM B541-01(2006) Standard Specification for Gold Electrical Contact Alloy
ASTM B542-07 Standard Terminology Relating to Electrical Contacts and Their Use
ASTM B543-07 Standard Specification for Welded Copper and Copper-Alloy Heat Exchanger Tube
ASTM B545-97(2004)e1 Standard Specification for Electrodeposited Coatings of Tin
ASTM B546-04 Standard Specification for Electric Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330 and UNS N08332), Ni-Cr-Fe-Al Alloy (UNS N06603), Ni-Cr-Fe Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe
ASTM B547/B547M-02 Standard Specification for Aluminum and Aluminum-Alloy Formed and Arc-Welded Round Tube
ASTM B548-03 Standard Test Method for Ultrasonic Inspection of Aluminum-Alloy Plate for Pressure Vessels
ASTM B549-04 Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Clad Steel Reinforced (ACSR/AW)
ASTM B550/B550M-07 Standard Specification for Zirconium and Zirconium Alloy Bar and Wire
ASTM B551/B551M-07 Standard Specification for Zirconium and Zirconium Alloy Strip, Sheet, and Plate
ASTM B552-98(2004) Standard Specification for Seamless and Welded Copper--Nickel Tubes For Water Desalting Plants
ASTM B555-86(2007) Standard Guide for Measurement of Electrodeposited Metallic Coating Thicknesses by Dropping Test
ASTM B556-90(2007) Standard Guide for Measurement of Thin Chromium Coatings by Spot Test
ASTM B557-06 Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products
ASTM B557M-07 Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products [Metric]
ASTM B558-79(2003) Standard Practice for Preparation of Nickel Alloys for Electroplating
ASTM B559-93(2007) Standard Specification for Nickel-Coated, Copper-Clad Steel Wire for Electronic Application
ASTM B560-00(2005) Standard Specification for Modern Pewter Alloys
ASTM B561-94(2005) Standard Specification for Refined Platinum
ASTM B562-95(2005) Standard Specification for Refined Gold
ASTM B563-01(2006) Standard Specification for Palladium-Silver-Copper Electrical Contact Alloy
ASTM B564-06a Standard Specification for Nickel Alloy Forgings
ASTM B565-04 Standard Test Method for Shear Testing of Aluminum and Aluminum-Alloy Rivets and Cold-Heading Wire and Rods
ASTM B566-04a Standard Specification for Copper-Clad Aluminum Wire
ASTM B567-98(2003) Standard Test Method for Measurement of Coating Thickness by the Beta Backscatter Method
ASTM B568-98(2004) Standard Test Method for Measurement of Coating Thickness by X-Ray Spectrometry
ASTM B569-04 Standard Specification for Brass Strip in Narrow Widths and Light Gage for Heat-Exchanger Tubing
ASTM B570-06 Standard Specification for Copper-Beryllium Alloy (UNS Nos. C17000 and C17200) Forgings and Extrusions
ASTM B571-97(2003) Standard Practice for Qualitative Adhesion Testing of Metallic Coatings
ASTM B572-06 Standard Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Rod
ASTM B573-06 Standard Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, N10242)* Rod
ASTM B574-06e1 Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Molybdenum-Chromium-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten Alloy Rod
ASTM B575-06 Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, Low-Carbon Nickel-Chromium-Molybdenum-Tantalum, and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten Alloy Plate, Sheet, and Strip
ASTM B576-94(2005) Standard Guide for Arc Erosion Testing of Electrical Contact Materials
ASTM B577-93(2004)e1 Standard Test Methods for Detection of Cuprous Oxide (Hydrogen Embrittlement Susceptibility) in Copper
ASTM B578-87(2004) Standard Test Method for Microhardness of Electroplated Coatings
ASTM B579-73(2004) Standard Specification for Electrodeposited Coatings of Tin-Lead Alloy (Solder Plate)
ASTM B580-79(2004) Standard Specification for Anodic Oxide Coatings on Aluminum
ASTM B581-02 Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Rod
ASTM B582-02 Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Plate, Sheet, and Strip
ASTM B584-06a Standard Specification for Copper Alloy Sand Castings for General Applications
ASTM B587-06 Standard Specification for Welded Brass Tube
ASTM B588-88(2006) Standard Test Method for Measurement of Thickness of Transparent or Opaque Coatings by Double-Beam Interference Microscope Technique
ASTM B589-94(2005) Standard Specification for Refined Palladium
ASTM B591-04 Standard Specification for Copper-Zinc-Tin and Copper-Zinc-Tin-Iron-Nickel Alloys Plate, Sheet, Strip, and Rolled Bar
ASTM B592-01(2006) Standard Specification for Copper-Zinc-aluminum-Cobalt Alloy, Copper-Zinc-Tin-Iron Alloy Plate, Sheet, Strip, and Rolled Bar
ASTM B593-96(2003)e1 Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
ASTM B594-06 Standard Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products for Aerospace Applications
ASTM B595-95(2006) Standard Specification for Sintered Aluminum Structural Parts
ASTM B596-89(2006) Standard Specification for Gold-Copper Alloy Electrical Contact Material
ASTM B598-98(2004) Standard Practice for Determining Offset Yield Strength in Tension for Copper Alloys
ASTM B599-92(2003)e1 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Plate, Sheet, and Strip
ASTM B600-91(2002)e1 Standard Guide for Descaling and Cleaning Titanium and Titanium Alloy Surfaces
ASTM B601-07 Standard Classification for Temper Designations for Copper and Copper Alloys—Wrought and Cast
ASTM B602-88(2005) Standard Test Method for Attribute Sampling of Metallic and Inorganic Coatings
ASTM B603-07 Standard Specification for Drawn or Rolled Iron-Chromium-Aluminum Alloys for Electrical Heating Elements
ASTM B604-91(2003)e1 Standard Specification for Decorative Electroplated Coatings of Copper Plus Nickel Plus Chromium on Plastics
ASTM B605-95a(2004) Standard Specification for Electrodeposited Coatings of Tin-Nickel Alloy
ASTM B606-02 Standard Specification for High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Aluminum and Aluminum-Alloy Conductors, Steel Reinforced
ASTM B607-91(2003) Standard Specification for Autocatalytic Nickel Boron Coatings for Engineering Use
ASTM B608-07 Standard Specification for Welded Copper-Alloy Pipe
ASTM B609/B609M-99(2004) Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes
ASTM B610-00e1 Standard Test Method for Measuring Dimensional Changes of Metal Powder Specimens
ASTM B611-85(2005) Standard Test Method for Abrasive Wear Resistance of Cemented Carbides
ASTM B613-76(2006) Standard Guide for Preparing Specifications for Miniature Brushes of Composite Materials for Sliding Electric Contacts
ASTM B614-05 Standard Practice for Descaling and Cleaning Zirconium and Zirconium Alloy Surfaces
ASTM B615-79(2006) Standard Practice for Measuring Electrical Contact Noise in Sliding Electrical Contacts
ASTM B616-96(2006) Standard Specification for Refined Rhodium
ASTM B617-98(2004) Standard Specification for Coin Silver Electrical Contact Alloy
ASTM B618/B618M-07 Standard Specification for Aluminum-Alloy Investment Castings
ASTM B619-06 Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Pipe
ASTM B620-03 Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Plate, Sheet, and Strip
ASTM B621-02(2006) Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Rod
ASTM B622-06 Standard Specification for Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube
ASTM B624-07 Standard Specification for High-Strength, High-Conductivity Copper-Alloy Wire for Electronic Application
ASTM B625-05 Standard Specification for UNS N08925, UNS N08031, UNS N08932, UNS N08926, UNS N08354, and UNS R20033 Plate, Sheet, and Strip
ASTM B626-06 Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Tube
ASTM B628-98(2004) Standard Specification for Silver-Copper Eutectic Electrical Contact Alloy
ASTM B629-77(2003) Standard Practice for Preparation of Molybdenum and Molybdenum Alloys for Electroplating
ASTM B630-88(2006) Standard Practice for Preparation of Chromium for Electroplating with Chromium
ASTM B631-93(2004) Standard Specification for Silver-Tungsten Electrical Contact Materials
ASTM B632/B632M-02 Standard Specification for Aluminum-Alloy Rolled Tread Plate
ASTM B633-07 Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel
ASTM B634-88(2004)e1 Standard Specification for Electrodeposited Coatings of Rhodium for Engineering Use
ASTM B635-00(2004)e1 Standard Specification for Coatings of Cadmium-Tin Mechanically Deposited
ASTM B636-84(2006)e1 Standard Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the Spiral Contractometer
ASTM B637-06 Standard Specification for Precipitation-Hardening Nickel Alloy Bars, Forgings, and Forging Stock for High-Temperature Service
ASTM B639-02 Standard Specification for Precipitation Hardening Cobalt-Containing Alloys (UNS R30155 and UNS R30816) Rod, Bar, Forgings, and Forging Stock for High-Temperature Service
ASTM B640-07 Standard Specification for Welded Copper Tube for Air Conditioning and Refrigeration Service
ASTM B643-00(2005) Standard Specification for Copper-Beryllium Alloy Seamless Tube
ASTM B644-05 Standard Specification for Copper Alloy Addition Agents
ASTM B645-07 Standard Practice for Linear-Elastic Plane-Strain Fracture Toughness Testing of Aluminum Alloys
ASTM B646-06a Standard Practice for Fracture Toughness Testing of Aluminum Alloys
ASTM B647-84(2006) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage
ASTM B648-78(2006) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
ASTM B649-06 Standard Specification for Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloys (UNS N08925, UNS N08031, UNS N08354, and UNS N08926), and Cr-Ni-Fe-N Low-Carbon Alloy (UNS R20033) Bar and Wire, and Ni-Cr-Fe-Mo-N Alloy (UNS N08936) Wire
ASTM B650-95(2002) Standard Specification for Electrodeposited Engineering Chromium Coatings on Ferrous Substrates
ASTM B651-83(2006) Standard Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with Double-Beam Interference Microscope
ASTM B652/B652M-04 Standard Specification for Niobium-Hafnium Alloy Ingots
ASTM B653/B653M-06 Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Welding Fittings
ASTM B654/B654M-04 Standard Specification for Niobium-Hafnium Alloy Foil, Sheet, Strip, and Plate
ASTM B655/B655M-04 Standard Specification for Niobium-Hafnium Alloy Bar, Rod, and Wire
ASTM B657-05 Guide for Metallographic Identification of Microstructure in Cemented Carbides
ASTM B658/B658M-06 Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Pipe
ASTM B659-90(2003) Standard Guide for Measuring Thickness of Metallic and Inorganic Coatings
ASTM B660-02 Standard Practices for Packaging/Packing of Aluminum and Magnesium Products
ASTM B661-06 Standard Practice for Heat Treatment of Magnesium Alloys
ASTM B662-94(2006) Standard Specification for Silver-Molybdenum Electrical Contact Material
ASTM B663-94(2006) Standard Specification for Silver-Tungsten Carbide Electrical Contact Material
ASTM B664-90(2006) Standard Specification for 80 % Silver-20 % Graphite Sliding Contact Material
ASTM B665-03 Standard Guide for Metallographic Sample Preparation of Cemented Tungsten Carbides
ASTM B666/B666M-01 Standard Practice for Identification Marking of Aluminum and Magnesium Products
ASTM B667-97(2003)e1 Standard Practice for Construction and Use of a Probe for Measuring Electrical Contact Resistance
ASTM B668-05 Standard Specification for UNS N08028 Seamless Pipe and Tube
ASTM B670-02 Standard Specification for Precipitation-Hardening Nickel Alloy (UNS N07718) Plate, Sheet, and Strip for High-Temperature Service
ASTM B671-81(2005) Standard Specification for Refined Iridium
ASTM B672-02 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Bar and Wire
ASTM B673-05e1 Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Pipe
ASTM B674-05 Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Tube
ASTM B675-02(2007) Standard Specification for UNS N08367 Welded Pipe
ASTM B676-03 Standard Specification for UNS N08367 Welded Tube
ASTM B677-05 Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Seamless Pipe and Tube
ASTM B678-86(2006) Standard Test Method for Solderability of Metallic-Coated Products
ASTM B679-98(2004)e1 Standard Specification for Electrodeposited Coatings of Palladium for Engineering Use
ASTM B680-80(2004) Standard Test Method for Seal Quality of Anodic Coatings on Aluminum by Acid Dissolution
ASTM B682-01 Standard Specification for Standard Metric Sizes of Electrical Conductors
ASTM B683-01(2006) Standard Specification for Pure Palladium Electrical Contact Material
ASTM B684-97(2002) Standard Specification for Platinum-Iridium Electrical Contact Materials
ASTM B685-01(2006) Standard Specification for Palladium-Copper Electrical Contact Material
ASTM B686/B686M-07 Standard Specification for Aluminum Alloy Castings, High-Strength
ASTM B687-99(2005)e1 Standard Specification for Brass, Copper, and Chromium-Plated Pipe Nipples
ASTM B688-96(2004) Standard Specification for Chromium-Nickel-Molybdenum-Iron (UNS N08366 and UNS N08367) Plate, Sheet, and Strip
ASTM B689-97(2003) Standard Specification for Electroplated Engineering Nickel Coatings
ASTM B690-02(2007) Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Seamless Pipe and Tube
ASTM B691-02 Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Rod, Bar, and Wire
ASTM B692-90(2006) Standard Specification for 75 % Silver-25 % Graphite Sliding Contact Material
ASTM B693-91(2006) Standard Specification for Silver-Nickel Electrical Contact Materials
ASTM B694-03 Standard Specification for Copper, Copper-Alloy, Copper-Clad Bronze (CCB), Copper-Clad Stainless Steel (CCS), and Copper-Clad Alloy Steel (CAS) Sheet and Strip for Electrical Cable Shielding
ASTM B695-04 Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel
ASTM B696-00(2004)e1 Standard Specification for Coatings of Cadmium Mechanically Deposited
ASTM B697-88(2005) Standard Guide for Selection of Sampling Plans for Inspection of Electrodeposited Metallic and Inorganic Coatings
ASTM B698-02 Standard Classification for Seamless Copper and Copper Alloy Plumbing Pipe and Tube
ASTM B699-86(2003) Standard Specification for Coatings of Cadmium Vacuum-Deposited on Iron and Steel
ASTM B700-97(2002) Standard Specification for Electrodeposited Coatings of Silver for Engineering Use
ASTM B701/B701M-06 Standard Specification for Concentric-Lay-Stranded Self-Damping Aluminum Conductors, Steel Reinforced (ACSR/SD)
ASTM B702-93(2004) Standard Specification for Copper-Tungsten Electrical Contact Material
ASTM B703-05 Standard Test Method for Apparent Density of Powders Using Arnold Meter
ASTM B704-03 Standard Specification for Welded UNS N06625, UNS N06219 and UNS N08825 Alloy Tubes
ASTM B705-05 Standard Specification for Nickel-Alloy (UNS N06625, N06219 and N08825) Welded Pipe
ASTM B706-00(2006) Standard Specification for Seamless Copper Alloy (UNS No. C69100) Pipe and Tube
ASTM B708-05 Standard Specification for Tantalum and Tantalum Alloy Plate, Sheet, and Strip
ASTM B709-04 Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloy (UNS N08028)* Plate, Sheet, and Strip
ASTM B710-04 Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Pipe
ASTM B711-05 Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy Conductors, Steel Reinforced (AACSR) (6201)
ASTM B712-93(2006) Standard Guide for Determination of Sodium and Potassium Content For Silver-Cadmium Oxide Contact Materials
ASTM B715-96(2001) Standard Specification for Sintered Copper Structural Parts for Electrical Conductivity Applications
ASTM B717-96(2006) Standard Specification for Refined Ruthenium
ASTM B718-00(2006) Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Plate, Sheet, and Strip
ASTM B719-00(2005) Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Bar
ASTM B722-06 Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Seamless Pipe and Tube
ASTM B723-00(2005) Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Pipe
ASTM B724-00(2006) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Newage, Portable, Non-Caliper-Type Instrument
ASTM B725-05 Standard Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy (UNS N04400) Pipe
ASTM B726-02(2006) Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Tube
ASTM B727-04 Standard Practice for Preparation of Plastics Materials for Electroplating
ASTM B729-05 Standard Specification for Seamless UNS N08020, UNS N08026, and UNS N08024 Nickel-Alloy Pipe and Tube
ASTM B731-96(2006) Standard Specification for 60 % Palladium-40 % Silver Electrical Contact Material
ASTM B733-04 Standard Specification for Autocatalytic (Electroless) Nickel-Phosphorus Coatings on Metal
ASTM B734-97(2003)e1 Standard Specification for Electrodeposited Copper for Engineering Uses
ASTM B735-06 Standard Test Method for Porosity in Gold Coatings on Metal Substrates by Nitric Acid Vapor
ASTM B736-00(2006) Standard Specification for Aluminum, Aluminum Alloy and Aluminum-Clad Steel Cable Shielding Stock
ASTM B737-05 Standard Specification for Hot-Rolled and/or Cold-Finished Hafnium Rod and Wire
ASTM B738-03 Standard Specification for Fine-Wire Bunch-Stranded and Rope-Lay Bunch-Stranded Copper Conductors for Use as Electrical Conductors
ASTM B739-03 Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Tube
ASTM B740-02 Standard Specification for Copper-Nickel-Tin Spinodal Alloy Strip
ASTM B742-90(2006) Standard Specification for Fine Silver Electrical Contact Fabricated Material
ASTM B743-06 Standard Specification for Seamless Copper Tube in Coils
ASTM B744/B744M-05 Standard Specification for Aluminum Alloy Sheet for Corrugated Aluminum Pipe
ASTM B745/B745M-97(2005) Standard Specification for Corrugated Aluminum Pipe for Sewers and Drains
ASTM B746/B746M-02(2007) Standard Specification for Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches
ASTM B747-07 Standard Specification for Copper-Zirconium Alloy Sheet and Strip
ASTM B748-90(2006) Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
ASTM B749-03 Standard Specification for Lead and Lead Alloy Strip, Sheet, and Plate Products
ASTM B750-07 Standard Specification for GALFAN (Zinc-5 % Aluminum-Mischmetal) Alloy in Ingot Form for Hot-Dip Coatings
ASTM B751-03 Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Tube
ASTM B752-06 Standard Specification for Castings, Zirconium-Base, Corrosion Resistant, for General Application
ASTM B753-07 Standard Specification for Thermostat Component Alloys
ASTM B754-89(2005) Standard Test Method for Measuring and Recording the Deviations from Flatness in Copper and Copper Alloy Strip
ASTM B755-00(2006) Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Plate, Sheet, and Strip
ASTM B756-00(2006) Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06110) Rod and Bar
ASTM B757-00(2006) Standard Specification for Nickel-Chromium-Molybdenum-Tungsten-Alloys (UNS N06110) Welded Pipe
ASTM B758-00(2006) Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Welded Tube
ASTM B759-00(2006) Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Pipe and Tube
ASTM B760-86(1999) Standard Specification for Tungsten Plate, Sheet, and Foil
ASTM B761-06 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by X-Ray Monitoring of Gravity Sedimentation
ASTM B762-90(2005) Standard Test Method of Variables Sampling of Metallic and Inorganic Coatings
ASTM B763-04 Standard Specification for Copper Alloy Sand Castings for Valve Applications
ASTM B764-04 Standard Test Method for Simultaneous Thickness and Electrode Potential Determination of Individual Layers in Multilayer Nickel Deposit (STEP Test)
ASTM B765-03 Standard Guide for Selection of Porosity and Gross Defect Tests for Electrodeposits and Related Metallic Coatings
ASTM B766-86(2003) Standard Specification for Electrodeposited Coatings of Cadmium
ASTM B767-88(2006) Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures
ASTM B768-99(2004) Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Strip and Sheet
ASTM B769-07 Standard Test Method for Shear Testing of Aluminum Alloys
ASTM B770-05 Standard Specification for Copper-Beryllium Alloy Sand Castings for General Applications
ASTM B771-87(2006) Standard Test Method for Short Rod Fracture Toughness of Cemented Carbides
ASTM B772-97(2003) Standard Guide for Specifying the Chemical Compositions for Electrical Contact Materials (Arcing and Nonarcing)
ASTM B773-96(2002)e1 Standard Guide for Ultrasonic C-Scan Bond Evaluation of Brazed or Welded Electrical Contact Assemblies
ASTM B774-00(2005) Standard Specification for Low Melting Point Alloys
ASTM B775-02 Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Pipe
ASTM B776-07 Standard Specification for Hafnium and Hafnium Alloy Strip, Sheet, and Plate
ASTM B777-99 Standard Specification for Tungsten Base, High-Density Metal
ASTM B778-02(2007) Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors (AAC/TW)
ASTM B779-03 Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced (ACSR/TW)
ASTM B780-98(2004) Standard Specification for 75% Silver, 24.5% Copper, 0.5% Nickel Electrical Contact Alloy
ASTM B781-93a(2006) Standard Guide for Silver-Cadmium Oxide Contact Material
ASTM B783-04 Standard Specification for Materials for Ferrous Powder Metallurgy (P/M) Structural Parts
ASTM B784-01(2006) Standard Specification for Modified Concentric-Lay-Stranded Copper Conductors for Use in Insulated Electrical Cables
ASTM B786-02a Standard Specification for 19 Wire Combination Unilay-Stranded Aluminum Conductors for Subsequent Insulation
ASTM B787/B787M-04 Standard Specification for 19 Wire Combination Unilay-Stranded Copper Conductors for Subsequent Insulation
ASTM B788/B788M-04 Standard Practice for Installing Factory-Made Corrugated Aluminum Culverts and Storm Sewer Pipe
ASTM B789/B789M-99(2005) Standard Practice for Installing Corrugated Aluminum Structural Plate Pipe for Culverts and Sewers
ASTM B790/B790M-00(2006) Standard Practice for Structural Design of Corrugated Aluminum Pipe, Pipe-Arches, and Arches for Culverts, Storm Sewers, and Other Buried Conduits
ASTM B792-01(2005)e1 Standard Specification for Zinc Alloys in Ingot Form for Slush Casting
ASTM B793-03 Standard Specification for Zinc Casting Alloy Ingot for Sheet Metal Forming Dies and Plastic Injection Molds
ASTM B794-97(2003) Standard Test Method for Durability Wear Testing of Separable Electrical Connector Systems Using Electrical Resistance Measurements
ASTM B795-93(2002)e1 Standard Test Method for Determining the Percentage of Alloyed or Unalloyed Iron Contamination Present in Powder Forged (P/F) Steel Parts
ASTM B796-02 Standard Test Method for Nonmetallic Inclusion Content of Powders Intended for Powder Forging (P/F) Applications
ASTM B797-93(2007) Standard Test Method for Surface Finger Oxide Penetration Depth and Presence of Interparticle Oxide Networks in Powder Forged (P/F) Steel Parts
ASTM B798-95(2005) Standard Test Method for Porosity in Gold or Palladium Coatings on Metal Substrates by Gel-Bulk Electrography
ASTM B799-95(2005) Standard Test Method for Porosity in Gold and Palladium Coatings by Sulfurous Acid/Sulfur-Dioxide Vapor
ASTM B800-05 Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes-Annealed and Intermediate Tempers
ASTM B801-07 Standard Specification for Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy for Subsequent Covering or Insulation
ASTM B802/B802M-02 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR)
ASTM B803-02 Standard Specification for High-Strength Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum and Aluminum-Alloy Conductors, Steel Reinforced
ASTM B804-02(2007) Standard Specification for UNS N08367 and UNS N08926 Welded Pipe
ASTM B805-06 Standard Specification for Precipitation Hardening Nickel Alloys Bar and Wire
ASTM B806-06 Standard Specification for Copper Alloy Permanent Mold Castings for General Applications
ASTM B807/B807M-06 Standard Practice for Extrusion Press Solution Heat Treatment for Aluminum Alloys
ASTM B808-05 Standard Test Method for Monitoring of Atmospheric Corrosion Chambers by Quartz Crystal Microbalances
ASTM B809-95(2003) Standard Test Method for Porosity in Metallic Coatings by Humid Sulfur Vapor ("Flowers-of-Sulfur")
ASTM B810-01a(2006) Standard Test Method for Calibration of Atmospheric Corrosion Test Chambers by Change in Mass of Copper Coupons
ASTM B811-02(2007) Standard Specification for Wrought Zirconium Alloy Seamless Tubes for Nuclear Reactor Fuel Cladding
ASTM B812-96(2002)e1 Standard Test Method for Resistance to Environmental Degradation of Electrical Pressure Connections Involving Aluminum and Intended for Residential Applications
ASTM B813-00e1 Standard Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube
ASTM B814-06 Standard Specification for Nickel-Chromium-Iron-Molybdenum-Tungsten Alloy (UNS N06920) Plate, Sheet, and Strip
ASTM B815-02(2006) Standard Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Rod
ASTM B816-00(2004)e1 Standard Specification for Coatings of Cadmium-Zinc Mechanically Deposited
ASTM B817-03 Standard Specification for Powder Metallurgy (P/M) Titanium Alloy Structural Components
ASTM B818-03 Standard Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Plate, Sheet and Strip
ASTM B819-00(2006) Standard Specification for Seamless Copper Tube for Medical Gas Systems
ASTM B820-04e1 Standard Test Method for Bend Test for Determining the Formability of Copper and Copper Alloy Strip
ASTM B821-02(2007) Standard Guide for Liquid Dispersion of Metal Powders and Related Compounds for Particle Size Analysis
ASTM B822-02 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by Light Scattering
ASTM B823-01 Standard Specification for Materials for Nonferrous Powder Metallurgy (P/M) Structural Parts
ASTM B824-04 Standard Specification for General Requirements for Copper Alloy Castings
ASTM B825-02 Standard Test Method for Coulometric Reduction of Surface Films on Metallic Test Samples
ASTM B826-03 Standard Test Method for Monitoring Atmospheric Corrosion Tests by Electrical Resistance Probes
ASTM B827-05 Standard Practice for Conducting Mixed Flowing Gas (MFG) Environmental Tests
ASTM B828-02 Standard Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings
ASTM B829-04a Standard Specification for General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube
ASTM B830-97(2003) Standard Specification for Uniform Test Methods and Frequency
ASTM B831-05 Standard Test Method for Shear Testing of Thin Aluminum Alloy Products
ASTM B832-93(2003) Standard Guide for Electroforming with Nickel and Copper
ASTM B833-06 Standard Specification for Zinc and Zinc Alloy Wire for Thermal Spraying (Metallizing) for the Corrosion Protection of Steel
ASTM B834-95(2003) Standard Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS N08367) and Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625) Alloy Pipe Flanges, Fittings, Valves, and Parts
ASTM B835-04 Standard Specification for Compact Round Stranded Copper Conductors Using Single Input Wire Construction
ASTM B836-00(2005) Standard Specification for Compact Round Stranded Aluminum Conductors Using Single Input Wire Construction
ASTM B837-01 Standard Specification for Seamless Copper Tube for Natural Gas and Liquefied Petroleum (LP) Gas Fuel Distribution Systems
ASTM B839-04 Standard Test Method for Residual Embrittlement in Metallic Coated, Externally Threaded Articles, Fasteners, and Rod—Inclined Wedge Method
ASTM B840-99(2004) Standard Specification for Electrodeposited Coatings for Zinc Cobalt Alloy Deposits
ASTM B841-99(2004) Standard Specification for Electrodeposited Coatings for Zinc Nickel Alloy Deposits
ASTM B842-99(2005) Standard Specification for Electrodeposited Coatings for Zinc Iron Alloy Deposits
ASTM B843-07 Standard Specification for Magnesium Alloy Anodes for Cathodic Protection
ASTM B844-98(2004) Standard Guide for Silver-Tin Oxide Contact Material
ASTM B845-97(2003) Standard Guide for Mixed Flowing Gas (MFG) Tests for Electrical Contacts
ASTM B846-06a Standard Terminology for Copper and Copper Alloys
ASTM B848-05 Specification for Powder Forged (P/F) Ferrous Materials
ASTM B849-02(2007) Standard Specification for Pre-Treatments of Iron or Steel for Reducing Risk of Hydrogen Embrittlement
ASTM B850-98(2004) Standard Guide for Post-Coating Treatments of Steel for Reducing the Risk of Hydrogen Embrittlement
ASTM B851-04 Standard Specification for Automated Controlled Shot Peening of Metallic Articles Prior to Nickel, Autocatalytic Nickel, or Chromium Plating, or as Final Finish
ASTM B852-07 Standard Specification for Continuous Galvanizing Grade (CGG) Zinc Alloys for Hot-Dip Galvanizing of Sheet Steel
ASTM B853-07 Standard Specification for Powder Metallurgy (PM) Boron Stainless Steel Structural Components
ASTM B854-98(2004) Standard Guide for Measuring Electrical Contact Intermittences
ASTM B855-06 Standard Test Method for Volumetric Flow Rate of Metal Powders Using Arnold Meter and Hall Funnel
ASTM B856-03 Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated Steel Supported (ACSS)
ASTM B857-02 Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Supported (ACSS/TW)
ASTM B858-06 Standard Test Method for Ammonia Vapor Test for Determining Susceptibility to Stress Corrosion Cracking in Copper Alloys
ASTM B859-03 Standard Practice for De-Agglomeration of Refractory Metal Powders and Their Compounds Prior to Particle Size Analysis
ASTM B860-07 Standard Specification for Zinc Master Alloys for Use in Hot Dip Galvanizing
ASTM B861-06a Standard Specification for Titanium and Titanium Alloy Seamless Pipe
ASTM B862-06be1 Standard Specification for Titanium and Titanium Alloy Welded Pipe
ASTM B863-06a Standard Specification for Titanium and Titanium Alloy Wire
ASTM B864/B864M-00(2007) Standard Specification for Corrugated Aluminum Box Culverts
ASTM B865-04 Standard Specification for Precipitation Hardening Nickel-Copper-Aluminum Alloy (UNS N05500) Bar, Rod, Wire, Forgings, and Forging Stock
ASTM B866-95(2003) Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by Polysulfide Immersion
ASTM B867-95(2003) Standard Specification for Electrodeposited Coatings of Palladium-Nickel for Engineering Use
ASTM B868-96(2002)e3 Standard Practice for Contact Performance Classification of Electrical Connection Systems
ASTM B869-07 Standard Specification for Copper-Clad Steel Electrical Conductor for CATV Drop Wire
ASTM B870-02 Standard Specification for Copper-Beryllium Alloy Forgings and Extrusions Alloys (UNS Nos. C17500 and C17510)
ASTM B871-01(2007) Standard Test Method for Tear Testing of Aluminum Alloy Products
ASTM B872-06 Standard Specification for Precipitation-Hardening Nickel Alloys Plate, Sheet, and Strip
ASTM B873-01(2007) Standard Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods ASTM B212, ASTM B329, and ASTM B417
ASTM B874-96(2003) Standard Specification for Chromium Diffusion Coating Applied by Pack Cementation Process
ASTM B875-96(2003) Standard Specification for Aluminum Diffusion Coating Applied by Pack Cementation Process
ASTM B877-96(2003) Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by the Phosphomolybdic Acid (PMA) Method
ASTM B878-97(2003) Standard Test Method for Nanosecond Event Detection for Electrical Contacts and Connectors
ASTM B879-97(2003)e1 Standard Practice for Applying Non-Electrolytic Conversion Coatings on Magnesium and Magnesium Alloys
ASTM B880-03 Standard Specification for General Requirements for Chemical Check Analysis Limits for Nickel, Nickel Alloys, and Cobalt Alloys
ASTM B881-05 Standard Terminology Relating to Aluminum- and Magnesium- Alloy Products
ASTM B882-05 Specification for Pre-Patinated Copper for Architectural Applications
ASTM B883-05 Standard Specification for Metal Injection Molding (MIM) Ferrous Materials
ASTM B884-05 Standard Specification for Niobium-Titanium Alloy Billets, Bar, and Rod for Superconducting Applications
ASTM B885-97(2003) Standard Test Method for Presence of Foreign Matter on Printed Wiring Board Contacts
ASTM B886-03 Standard Test Methods for Determination of Magnetic Saturation (Ms) of Cemented Carbides
ASTM B887-03 Standard Test Method for Determination of Coercivity (Hcs) of Cemented Carbides
ASTM B888-06 Standard Specification for Copper Alloy Strip for Use in Manufacture of Electrical Connectors or Spring Contacts
ASTM B890-07 Standard Test Method for Determination of Metallic Constituents of Tungsten Alloys and Tungsten Hardmetals by X-Ray Fluorescence Spectrometry
ASTM B891-98(2004) Standard Specification for Seamless and Welded Titanium and Titanium Alloy Condenser and Heat Exchanger Tubes With Integral Fins
ASTM B892-03 Standard Specification for ACuZinc5 (Zinc-Copper-Aluminum) Alloy in Ingot Form for Die Castings
ASTM B893-98(2003) Specification for Hard-Coat Anodizing of Magnesium for Engineering Applications
ASTM B894-03 Standard Specification for ACuZinc5 (Zinc-Copper-Aluminum) Alloy Die Castings
ASTM B895-05 Test Methods for Evaluating the Corrosion Resistance of Stainless Steel Powder Metallurgy (P/M) Parts/Specimens by Immersion in a Sodium Chloride Solution
ASTM B896-99(2005) Standard Test Methods for Evaluating Connectability Characteristics of Electrical Conductor Materials
ASTM B897-03 Standard Specification for Configuration of Zinc and Zinc Alloy Jumbo and Block Ingot
ASTM B898-05e1 Standard Specification for Reactive and Refractory Metal Clad Plate
ASTM B899-06 Standard Terminology Relating to Non-ferrous Metals and Alloys
ASTM B900-04 Standard Practice for Packaging of Copper and Copper Alloy Mill Products for U.S. Government Agencies
ASTM B901-04 Standard Specification for Compressed Round Stranded Aluminum Conductors Using Single Input Wire Construction
ASTM B902-04a Standard Specification for Compressed Round Stranded Copper Conductors, Hard, Medium-Hard, or Soft Using Single Input Wire Construction
ASTM B903-00(2005) Standard Specification for Seamless Copper Heat Exchanger Tubes With Internal Enhancement
ASTM B904-00(2004) Standard Specification for Autocatalytic Nickel over Autocatalytic Copper for Electromagnetic Interference Shielding
ASTM B905-00(2005) Standard Test Methods for Assessing the Adhesion of Metallic and Inorganic Coatings by the Mechanized Tape Test
ASTM B906-02(2006) Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip
ASTM B907-05 Standard Specification for Zinc, Tin and Cadmium Base Alloys Used as Solders
ASTM B908-03 Standard Practice for the Use of Color Codes for Zinc Casting Alloy Ingot
ASTM B909-00(2006) Standard Guide for Plane Strain Fracture Toughness Testing of Non-Stress Relieved Aluminum Products
ASTM B910/B910M-07 Standard Specification for Annealed Copper-Clad Steel Wire
ASTM B911/B911M-05 Standard Specification for ACSR Twisted Pair Conductor (ACSR/TP)
ASTM B912-02 Standard Specification for Passivation of Stainless Steels Using Electropolishing
ASTM B913-05 Standard Test Method for Evaluation of Crimped Electrical Connections to 16-Gauge and Smaller Diameter Stranded and Solid Conductors
ASTM B914-03e2 Standard Practice for Color Codes on Zinc and Zinc Alloy Ingot for Use in Hot-Dip Galvanizing of Steel
ASTM B915-01(2007) Standard Test Method for Measuring Static Heat Resistance of Self-Cleaning Oven Coating
ASTM B916-01(2007) Standard Test Method for Adherence of Porcelain Enamel Coatings to Sheet Metal
ASTM B917/B917M-07 Standard Practice for Heat Treatment of Aluminum-Alloy Castings from All Processes
ASTM B918-01 Standard Practice for Heat Treatment of Wrought Aluminum Alloys
ASTM B919-01(2006) Standard Specification for Welded Copper Heat Exchanger Tubes With Internal Enhancement
ASTM B920-01(2006)e1 Standard Practice for Porosity in Gold and Palladium Alloy Coatings on Metal Substrates by Vapors of Sodium Hypochlorite Solution
ASTM B921-02 Standard Specification for Non-hexavalent Chromium Conversion Coatings on Aluminum and Aluminum Alloys
ASTM B922-02 Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption
ASTM B923-02 Standard Test Method for Metal Powder Skeletal Density by Helium or Nitrogen Pycnometry
ASTM B924-02(2006) Standard Specification for Seamless and Welded Nickel Alloy Condenser and Heat Exchanger Tubes With Integral Fins
ASTM B925-03 Standard Practices for Production and Preparation of Powder Metallurgy (P/M) Test Specimens
ASTM B926-03 Standard Method for Pinhole Determination in Aluminum and Aluminum Alloy Plain Foil by Means of a Light Table
ASTM B927-03 Standard Specification for Brass Rod, Bar, and Shapes
ASTM B928/B928M-07 Standard Specification for High Magnesium Aluminum-Alloy Sheet and Plate for Marine Service and Similar Environments
ASTM B929-05 Standard Specification for Copper-Nickel-Tin Spinodal Alloy Rod and Bar
ASTM B930-03 Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)
ASTM B931-03 Standard Test Method for Metallographically Estimating the Observed Case Depth of Ferrous Powder Metallurgy (P/M) Parts
ASTM B932-04 Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum-Gadolinium Alloy Plate, Sheet, and Strip
ASTM B933-04 Standard Test Method for Microindentation Hardness of Powder Metallurgy (P/M) Materials
ASTM B934-04a Standard Test Method for Effective Case Depth of Ferrous Powder Metallurgy (P/M) Parts Using Microindentation Hardness Measurements
ASTM B935-05 Standard Guide for Steam Treatment of Ferrous Powder Metallurgy (P/M) Materials
ASTM B936-04e1 Standard Specification for Copper-Chromium-Iron-Titanium Alloy Plate, Sheet, Strip and Rolled Bar
ASTM B937-04 Standard Specification for Copper-Beryllium Seamless Tube (UNS Nos. C17500 and C17510)
ASTM B938-04 Standard Specification for Copper-Beryllium Alloy Forgings and Extrusions (UNS Nos. C17500 and C17510)
ASTM B939-05 Standard Test Method for Radial Crushing Strength, K, of Powder Metallurgy (P/M) Bearings and Structural Materials
ASTM B940-05 Standard Practice for Testing Non-Chromate Coatings on Zinc and Cadmium Surfaces
ASTM B941-05 Standard Specification for Heat Resistant Aluminum-Zirconium Alloy Wire for Electrical Purposes
ASTM B942-05 Standard Guide for Specification and Quality Assurance for the Electrical Contact Performance of Crimped Wire Terminations
ASTM B943-05 Standard Specification for Zinc and Tin Alloy Wire Used in Thermal Spraying for Electronic Applications
ASTM B944-06 Standard Specification for Copper-Beryllium Welded Heat Exchanger and Condenser Tube (UNS No. C17510)
ASTM B945-06 Standard Practice for Aluminum Alloy Extrusions Press Cooled from an Elevated Temperature Shaping Process for Production of T1, T2, T5 and T10-Type Tempers
ASTM B946-06 Standard Test Method for Surface Finish of Powder Metallurgy (P/M) Products
ASTM B947-06 Standard Practice for Hot Rolling Mill Solution Heat Treatment for Aluminum Alloy Plate
ASTM B949-06 Standard Specification for General Requirements for Zinc and Zinc Alloy Products
ASTM B950-06 Standard Guide for Editorial Procedures and Form of Product Specifications for Copper and Copper Alloys
ASTM B951-07 Standard Practice for Codification of Unalloyed Magnesium and Magnesium-Alloys, Cast and Wrought
ASTM B952-07 Standard Specification for Zinc Alloys in Ingot Form for Spin Casting
ASTM B953-07 Standard Practice for Sampling Magnesium and Magnesium Alloys for Spectrochemical Analysis
ASTM B954-07 Standard Test Method for Analysis of Magnesium and Magnesium Alloys by Atomic Emission Spectrometry
ASTM B956-07 Standard Specification for Welded Copper and Copper-Alloy Condenser and Heat Exchanger Tubes with Integral Fins
 
The ASME - American Society of Mechanical Engineers - ASME/ANSI B16 Standards covers pipes and fittings in cast iron , cast bronze, wrought copper and steel.
ASME/ANSI B16.1 - 1998 - Cast Iron Pipe Flanges and Flanged Fittings
This Standard for Classes 25, 125, and 250 Cast Iron Pipe Flanges and Flanged Fittings covers:
  • (a) pressure-temperature ratings,
  • (b) sizes and method of designating openings of reducing fittings,
  • (c) marking,
  • (d) minimum requirements for materials,
  • (e) dimensions and tolerances,
  • (f) bolt, nut, and gasket dimensions and
  • (g) tests.
ASME/ANSI B16.3 - 1998 - Malleable Iron Threaded Fittings
This Standard for threaded malleable iron fittings Classes 150, and 300 provides requirements for the following:
  • (a) pressure-temperature ratings
  • (b) size and method of designating openings of reducing fittings
  • (c) marking
  • (d) materials
  • (e) dimensions and tolerances
  • (f) threading
  • (g) coatings
ASME/ANSI B16.4 - 1998 - Cast Iron Threaded Fittings
This Standard for gray iron threaded fittings, Classes 125 and 250 covers:
  • (a) pressure-temperature ratings
  • (b) size and method of designating openings of reducing fittings
  • (c) marking
  • (d) material
  • (e) dimensions and tolerances
  • (f) threading, and
  • (g) coatings
ASME/ANSI B16.5 - 1996 - Pipe Flanges and Flanged Fittings
The ASME B16.5 - 1996 Pipe Flanges and Flange Fittings standard covers pressure-temperature ratings, materials, dimensions, tolerances, marking, testing, and methods of designating openings for pipe flanges and flanged fittings.
The standard includes flanges with rating class designations 150, 300, 400, 600, 900, 1500, and 2500 in sizes NPS 1/2 through NPS 24, with requirements given in both metric and U.S units. The Standard is limited to flanges and flanged fittings made from cast or forged materials, and blind flanges and certain reducing flanges made from cast, forged, or plate materials. Also included in this Standard are requirements and recommendations regarding flange bolting, flange gaskets, and flange joints.
ASME/ANSI B16.9 - 2001 - Factory-Made Wrought Steel Buttwelding Fittings
This Standard covers overall dimensions, tolerances, ratings, testing, and markings for wrought factory-made buttwelding fittings in sizes NPS 1/2 through 48 (DN 15 through 1200).
ASME/ANSI B16.10 - 2000 - Face-to-Face and End-to-End Dimensions of Valves
This Standard covers face-to-face and end-to-end dimensions of straightway valves, and center-to face and center-to-end dimensions of angle valves. Its purpose is to assure installation interchangeability for valves of a given material, type size, rating class, and end connection
ASME/ANSI B16.11 - 2001 - Forged Steel Fittings, Socket-Welding and Threaded
This Standard covers ratings, dimensions, tolerances, marking and material requirements for forged fittings, both socket-welding and threaded.
ASME/ANSI B16.12 - 1998 - Cast Iron Threaded Drainage Fittings
This Standard for cast iron threaded drainage fittings covers:
  • (a) size and method of designating openings in reducing fittings
  • (b) marking
  • (c) materials
  • (d) dimensions and tolerances
  • (e) threading
  • (f) ribs
  • (g) coatings
  • (h) face bevel discharge nozzles, input shafts, base plates, and foundation bolt holes (see Tables 1 and 2).
ASME/ANSI B16.14 - 1991 - Ferrous Pipe Plugs, Bushings and Locknuts with Pipe Threads
This Standard for Ferrous Pipe Plugs, Bushings, and Locknuts with Pipe Threads covers:
  • (a) pressure-temperature ratings:
  • (b) size;
  • (c) marking;
  • (d) materials;
  • (e) dimensions and tolerances;
  • (f) threading; and
  • (g) pattern taper.
ASME/ANSI B16.15 - 1985 (R1994) - Cast Bronze Threaded Fittings
This Standard pertains primarily to cast Class 125and Class 250 bronze threaded pipe fittings. Certain requirements also pertain to wrought or cast plugs, bushings, couplings, and caps. This Standard covers:
  • (a) pressure-temperature ratings;
  • (b) size and method of designating openings of reducing pipe fittings;
  • (c) marking;
  • (d) minimum requirements for casting quality and materials;
  • (e) dimensions and tolerances in U.S. customary and metric (SI) units;
  • (f) threading.
ASME/ANSI B16.18 - 1984 (R1994) - Cast Copper Alloy Solder Joint Pressure Fittings
This Standard for cast copper alloy solder joint pressure fittings designed for use with copper water tube, establishes requirements for:
  • (a) Pressure-temperature ratings;
  • (b) Abbreviations for end connections;
  • (c) Sizes and method of designating openings of fittings;
  • (d) Marking;
  • (e) Material;
  • (f) Dimensions and tolerances; and
  • (g) Tests.
ASME/ANSI B16.20 - 1998 - Metallic Gaskets for Pipe Flanges-Ring-Joint, Spiral-Would, and Jacketed
This standard covers materials, dimensions, tolerances, and markings for metal ring-joint gaskets, spiral-wound metal gaskets, and metal jacketed gaskets and filler material. These gaskets are dimensionally suitable for used with flanges described in the reference flange standards ASME/ANSI B16.5, ASME B16.47, and API-6A. This standard covers spiral-wound metal gaskets and metal jacketed gaskets for use with raised face and flat face flanges. Replaces API-601 or API-601.
ASME/ANSI B16.21 - 1992 - Nonmetallic Flat Gaskets for Pipe Flanges
This Standard for nonmetallic flat gaskets for bolted flanged joints in piping includes:
  • (a) types and sizes;
  • (b) materials;
  • (c) dimensions and allowable tolerances.
ASME/ANSI B16.22 - 1995 - Wrought Copper and Copper Alloy Solder Joint Pressure Fittings
The Standard establishes specifications for wrought copper and wrought copper alloy, solder-joint, seamless fittings, designed for use with seamless copper tube conforming to ASTM B 88 (water and general plumbing systems), B 280 (air conditioning and refrigeration service), and B 819 (medical gas systems), as well as fittings intended to be assembled with soldering materials conforming to ASTM B 32, brazing materials conforming to AWS A5.8, or with tapered pipe thread conforming to ASME B1.20.1. This Standard is allied with ASME B16.18, which covers cast copper alloy pressure fittings. It provides requirements for fitting ends suitable for soldering. This Standard covers:
  • (a) pressure temperature ratings;
  • (b) abbreviations for end connections;
  • (c) size and method of designating openings of fittings;
  • (d) marking;
  • (e) material;
  • (f) dimension and tolerances; and
  • (g) tests.
ASME/ANSI B16.23 - 1992 - Cast Copper Alloy Solder Joint Drainage Fittings (DWV)
The Standard establishes specifications for cast copper alloy solder joint drainage fittings, designed for use in drain, waste, and vent (DWV) systems. These fittings are designed for use with seamless copper tube conforming to ASTM B 306, Copper Drainage Tube (DWV), as well as fittings intended to be assembled with soldering materials conforming to ASTM B 32, or tapered pipe thread conforming to ASME B1.20.1. This standard is allied with ASME B16.29, Wrought Copper and Wrought Copper Alloy Solder Joint Drainage Fittings - DWV. It provides requirements for fitting ends suitable for soldering. This standard covers:
  • (a) description;
  • (b) pitch (slope);
  • (c) abbreviations for end connections;
  • (d) sizes and methods for designing openings for reducing fittings;
  • (e) marking;
  • (f) material; and
  • (g) dimensions and tolerances.
ASME/ANSI B16.24 - 1991 (R1998) - Cast Copper Alloy Pipe Flanges and Flanged Fittings
This Standard for Classes 25, 125, 250, and 800 Cast Iron Pipe Flanges and Flanged Fittings covers:
  • (a) pressure temperature ratings,
  • (b) sizes and methods of designating openings for reduced fittings,
  • (c) marking,
  • (d) minimum requirements for materials,
  • (e) dimensions and tolerances,
  • (f) bolt, nut, and gasket dimensions, and
  • (g) tests.
ASME/ANSI B16.25 - 1997 - Buttwelding Ends
  • The Standard covers the preparation of butt welding ends of piping components to be joined into a piping system by welding. It includes requirements for welding bevels, for external and internal shaping of heavy-wall components, and for preparation of internal ends (including dimensions and tolerances). Coverage includes preparation for joints with the following.
  • (a) no backing rings;
  • (b) split or non continuous backing rings;
  • (c) solid or continuous backing rings;
  • (d) consumable insert rings;
  • (e) gas tungsten are welding (GTAW) of the root pass. Details of preparation for any backing ring must be specified in ordering the component.
ASME/ANSI B16.26 - 1988 - Cast Copper Alloy Fittings for Flared Copper Tubes
This standard for Cast Copper Alloy Fitting for Flared Copper Tubes covers:
  • (a) pressure rating;
  • (b) material;
  • (c) size;
  • (d) threading;
  • (e) marking.
ASME/ANSI B16.28 - 1994 - Wrought Steel Buttwelding Short Radius Elbows and Returns
This Standard covers ratings, overall dimensions, testing, tolerances, and markings for wrought carbon and alloy steel buttwelding short radius elbows and returns. The term wrought denotes fittings made of pipe, tubing, plate, or forgings.
ASME/ANSI B16.29 - 1994 - Wrought Copper and Wrought Copper Alloy Solder Joint Drainage Fittings (DWV)
The standard for wrought copper and wrought copper alloy solder joint drainage fittings, designed for use with copper drainage tube, covers:
  • (a) Description,
  • (b) Pitch (slope),
  • (c) Abbreviations for End Connections,
  • (d) Sizes and Method of Designating Openings for Reducing Fittings,
  • (e) Marking,
  • (f) Material,
  • (g) Dimensions and Tolerances.
ASME/ANSI B16.33 - 1990 - Manually Operated Metallic Gas Valves for Use in Gas Piping Systems Up to 125 psig
General This Standard covers requirements for manually operated metallic valves sizes NPS 1.2 through NPS 2, for outdoor installation as gas shut-off valves at the end of the gas service line and before the gas regulator and meter where the designated gauge pressure of the gas piping system does not exceed 125 psi (8.6 bar). The Standard applies to valves operated in a temperature environment between .20 degrees F and 150 degrees F (.29 degrees C and 66 degrees C). Design This Standard sets forth the minimum capabilities, characteristics, and properties, which a valve at the time of manufacture must possess, in order to be considered suitable for use in gas piping systems.
ASME/ANSI B16.34 - 1996 - Valves - Flanged, Threaded, and Welding End
This standard applies to new valve construction and covers pressure-temperature ratings, dimensions, tolerances, materials, nondestructive examination requirements, testing, and marking for cast, forged, and fabricated flanged, threaded, and welding end, and wafer or flangeless valves of steel, nickel-base alloys, and other alloys shown in Table 1. Wafer or flangeless valves, bolted or through-bolt types, that are installed between flanges or against a flange shall be treated as flanged end valves.
ASME/ANSI B16.36 - 1996 - Orifice Flanges
This Standard covers flanges (similar to those covered in ASME B16.5) that have orifice pressure differential connections. Coverage is limited to the following:
  • (a) welding neck flanges Classes 300, 400, 600, 900, 1500, and 2500
  • (b) slip-on and threaded Class 300
  • Orifice, Nozzle and Venturi Flow Rate Meters
ASME/ANSI B16.38 - 1985 (R1994) - Large Metallic Valves for Gas Distribution
The standard covers only manually operated metallic valves in nominal pipe sizes 2 1/2 through 12 having the inlet and outlet on a common center line, which are suitable for controlling the flow of gas from open to fully closed, for use in distribution and service lines where the maximum gage pressure at which such distribution piping systems may be operated in accordance with the code of federal regulations (cfr), title 49, part 192, transportation of natural and other gas by pipeline; minimum safety standard, does not exceed 125 psi (8.6 bar). Valve seats, seals and stem packing may be nonmetallic.
ASME/ANSI B16.39 - 1986 (R1998) - Malleable Iron Threaded Pipe Unions
This Standard for threaded malleable iron unions, classes 150, 250, and 300, provides requirements for the following:
  • (a) design
  • (b) pressure-temperature ratings
  • (c) size
  • (d) marking
  • (e) materials
  • (f) joints and seats
  • (g) threads
  • (h) hydrostatic strength
  • (i) tensile strength
  • (j) air pressure test
  • (k) sampling
  • (l) coatings
  • (m) dimensions
ASME/ANSI B16.40 - 1985 (R1994) - Manually Operated Thermoplastic Gas
The Standard covers manually operated thermoplastic valves in nominal sizes 1.2 through 6 (as shown in Table 5). These valves are suitable for use below ground in thermoplastic distribution mains and service lines. The maximum pressure at which such distribution piping systems may be operated is in accordance with the Code of Federal Regulation (CFR) Title 49, Part 192, Transportation of Natural and Other Gas by Pipeline; Minimum Safety Standards, for temperature ranges of .20 deg. F to 100 deg. F (.29 deg. C to 38 deg. C). This Standard sets qualification requirements for each nominal valve size for each valve design as a necessary condition for demonstrating conformance to this Standard. This Standard sets requirements for newly manufactured valves for use in below ground piping systems for natural gas [includes synthetic natural gas (SNG)], and liquefied petroleum (LP) gases (distributed as a vapor, with or without the admixture of air) or mixtures thereof.
ASME/ANSI B16.42 - 1998 - Ductile Iron Pipe Flanges and Flanged Fittings, Classes 150 and 300
The Standard covers minimum requirements for Class 150 and 300 cast ductile iron pipe flanges and flanged fittings. The requirements covered are as follows:
  • (a) pressure-temperature ratings
  • (b) sizes and method of designating openings
  • (c) marking
  • (d) materials
  • (e) dimensions and tolerances
  • (f) blots, nuts, and gaskets
  • (g) tests
ASME/ANSIB16.44 - 1995 - Manually Operated Metallic Gas Valves for Use in House Piping Systems
This Standard applies to new valve construction and covers quarter turn manually operated metallic valves in sizes NPS 1/2-2 which are intended for indoor installation as gas shutoff valves when installed in indoor gas piping between a gas meter outlet & the inlet connection to a gas appliance.
ASME/ANSI B16.45 - 1998 - Cast Iron Fittings for Solvent Drainage Systems
The Standard for cast iron drainage fittings used on self-aerating, one-pipe Solvent drainage systems, covers the following:
  • (a) description
  • (b) sizes and methods for designating openings for reducing fittings
  • (c) marking
  • (d) material
  • (e) pitch
  • (f) design
  • (g) dimensions and tolerances
  • (h) tests
ASME/ANSI B16.47 - 1996 - Large Diameter Steel Flanges: NPS 26 through NPS 60
This Standard covers pressure-temperature ratings, materials, dimensions, tolerances, marking, and testing for pipe flanges in sizes NPS 26 through NPS 60 and in ratings Classes 75, 150,0300, 400, 600, and 900. Flanges may be cast, forged, or plate (for blind flanges only) materials. Requirements and recommendations regarding bolting and gaskets are also included.
ASME/ANSI B16.48 - 1997 - Steel Line Blanks
The Standard covers pressure-temperature ratings, materials, dimensions, tolerances, marking, and testing for operating line blanks in sizes NPS 1/2 through NPS 24 for installation between ASME B16. 5 flanges in the 150, 300, 600, 900, 1500, and 2500 pressure classes.
ASME/ANSI B16.49 - 2000 - Factory-Made Wrought Steel Buttwelding Induction Bends for Transportation and Distribution Systems
This Standard covers design, material, manufacturing, testing, marking, and inspection requirements for factory-made pipeline bends of carbon steel materials having controlled chemistry and mechanical properties, produced by the induction bending process, with or without tangents. This Standard covers induction bends for transportation and distribution piping applications (e.g., ASME B31.4, B31.8, and B31.11) Process and power piping have differing requirements and materials that may not be appropriate for the restrictions and examinations described herein, and therefore are not included in this Standard.





Home  |  Product Catalog  |  Inspection Report  |  Reference List  |  Standard Specification  |  Stainless Tube  |  Pipe Stock List  |  Certificates  |  Contact Us  |  Sitemap  |  Mobile Version
  English     简体版     繁體版

Powered by DIYTrade.com  Build your FREE website !
Find Best Price For China Products !

HomeContact UsSitemap