ASTM B68,ASTM B75,ASTM B88,ASTM B111,ASTM A280,AS 1571,AS1572-Copper Tube

EN 1057, EN 12735-1, EN 12735-2, EN 12449, ASTM B280, STM B68/251, ASTM B88, NF EN, GOST 617, GOST 11383,  JUS C.D5-500, JUS C.D5-502 
ASTM B42-This specification covers seamless copper pipe in all standard pipe sizes, both regular and extra— strong, suitable for use in plumbing, boiler feed lines, and for similar purposes.

ASTM B43-This specification covers seamless red brass (Copper Alloy UNS No. C23000) pipe in all standard pipe sizes, both regular and extra—strong, suitable for use in plumbing, boiler feed lines, and for similar purposes.

ASTM B68-This specification covers annealed seamless copper tube suitable for use in refrigerators, oil lines, gasoline lines, etc.., where tube absolutely free from scale end dirt is required.

ASTM B75-This specification covers seamless copper, round and rectangular including square tube suitable for general engineering purposes.

ASTM B88 : 99 (Copper Water and Gas Tube)
This specification covers hard drawn temper, seamless copper tubes which are suitable for use in general plumbing applications, such as underground water service, potable water distribution, gas distribution and fire sprinkler installations.
To assist with selection this standard is separated into three Types - K, L and M. Each type is differentiated by a range of wall thicknesses, with Type K having thicker walls than Type L, and Type L being thicker than Type M, for any given diameter.

ASTM ASTM B111/ASME SB111-This specification covers seamless tube and ferrule stock of copper and various copper alloys up to 2 .in.. (50.8mm), inc., in diameter, for Use in surface condensers, evaporators, and heat exchangers.

ASTM B135-This specification covers seamless round and rectangular including square copper alloy tube in straight lengths..

ASTM B251-This specification covers a group of general requirements common to several wrought product specifications. Unless otherwise specified in the purchase order, or in an individual specification, these general requirements shall apply to copper and copper-alloy tube supplied under specifications B 68, B 75, B135, and B466

ASTM B280-This specification covers seamless copper tube for air conditioning and refrigeration service and intended for use in the field for connection, repairs, and alterations.

ASTM B302-This specification covers threadless, seamless, deoxidized copper pipe (TP) in straight lengths, for piping systems that are assembled with brazed-joint pipe fittings.

ASTM B306-This specification covers seamless copper drainage tube (DWV) intended for use with soldered fittings for sanitary drainage, such as soil, waste, and vent piping.

ASTM B152 Alloy C11000, Standard Specification for Copper Sheet Strip, Plate and Rolled Bar.

ASTM B584 Alloy C84400, Standard Specification for Copper Alloy Sand Castings for General Applications.

Federal Specification WW-U-516 for Type Ill, Class A and Class B Copper Alloy Unions.

ASTM B677 Standard Specification for UNS N08904, UNS N08925, and UNS N08926 Seamless Pipe and Tube

BS EN 1057 has replaced the British Standard BS 2871 Part 1 and other conflicting standards previously used. This standardization with EN 1057 has provided a common standard for many markets. However, as there are no dimensional changes, all EN 1057 tube is totally compatible with current BS tube and fittings.

BS EN 13348-Copper Medical Gas Pipes, Complies with the latest HTM02-01 medical gas pipeline systems standard
BS EN 1254-Medical Gas fitttings
BS EN 13600: Copper and copper alloys – Seamless copper tubes for electrical purposes

AUSTRALIAN STANDARDS
AS 1432 Copper tubing for plumbing, gasfitting and drainage applications.
This standard provides for round seamless copper tubes intended for use in pressure and non-pressure plumbing, gasfitting and drainage applications in hard drawn, bending quality, annealed, and plastic lagged coils and straight lengths.
Inert plastic lagging is available for this product coloured in green for potable drinking water and lilac for recycled water applications.

AS 1571 Copper - Seamless tubes for airconditioning and refrigeration.
These tubes are supplied in both hard drawn straight lengths and annealed coils, after meticulous cleaning, dehydrating and capping, to ensure that the internal cleanliness standards are fully met. The intended use for this product is in airconditioning and refrigeration applications.

AS 1572 Copper - Seamless tubes for engineering purposes.
This Standard specifies seamless copper and copper alloy tubes for general purposes. It does not apply for heat exchangers or tubes for airconditioning.
NZS 3501 : 1976 Copper Tubes for water, gas and sanitation
This copper tube is manufactured in straight lengths, in half hard condition and in fully annealed coils.

Material
Cartridge Brass Tube (UNS-C2600)
Yellow Brass Tube (UNS-C2700)
Low-Leaded Brass Tube (UNS-C3300)
Bronze Tube
Brass Tube
Al-Brass Tube (UNS-C68700, C69710, C6872T)
Cu-Ni Tube (UNS-C70600)
Cu-Ni TUbe (UNS-C71500)
Alloy Tube (UNS-C71640)
Commercial Bronze Tube ( UNS-C2200)
Red Brass Tube (UNS-C2300)
Though Pitch Copper Tube (UNS-C1000)
Deoxidized Copper Tube (UNS0C1220)
Oxygen Free Electronic Copper Tube
Oxygen Free Copper Tube (UNS-C1020)

Federal specifications.
ANSI B16.22-WROT PRESSURE SOLDER-JOINT FITTINGS
ANSI B16.18-CAST PRESSURE SOLDER-JOINT FITTINGS
ANSI B18.26-CAST BRONZE FLARED TUBE FITTINGS
ANSI H23.1, ASTM B88 and WWT-799
-STREAMLINE COPPER TUBE — TYPES K, L & M
ANSI B70.1 and SAE J513-REFRIGERATION FLARE-TYPE FITTINGS
ANSI H23.5, ASTM B280, and WWT-775 -STREAMLINE COPPER REFRIGERATION SERVICE TUBE
ANSI H23.1 Type L, and ASTM B88,Type L, in accordance with ASTM B280-STREAMLINE NITROGENIZED ACR HARD DRAWN COPPER TUBE
OXYGEN SERVICE TUBE — To ANSI H23. 1 Types K and L and ASTM B88, Types K and L — hard drawn lengths only -— in accordance to CDA cleanliness specifications and NFPA 56F, Seamless Copper Tube cleaned for Oxygen Gas Service
WROT DWV SOLDER-JOINT FITTINGS — To ANSI B16.29
CAST DWV SOLDER-JOINT FITTINGS — To ANSI B16.23
STREAMLINE COPPER TUBE — TYPE DWV — To ANSI H23.6 and ASTM B306
COPPER PIPE — To ASTM B42
RED BRASS PIPE —To ASTM B43

Federal & ASTM specifications.
MSS SP1O4 Wrought Copper LW Solder Joint Pressure Fittings
ANSI B16.29-1990 Wrought Copper and Wrought Copper Alloy Solder Joint Drainage Fittings -DWV
ANSI B16.18-1 984 Cast Copper Alloy Solder Joint Pressure Fittings
ANSI B16.15-1978 Cast Bronze Threaded Fittings
ANSI B16.26-1983 Cast Copper Alloy Fittings for Flared Copper Tube
ANSI B16.23-1984 Cast Copper Alloy Solder Joint Drainage Fittings -DWV
ANSI B16.24-1 979 Bronze Pipe Ranges and Flanged Fittings

BS EN 1172-2011 Copper and copper alloys. Sheet and strip for building purposes
DIN EN 1971-2-2012 Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 2: Test with an internal probe on the inner surface; German version EN 1971-2:2011
DIN EN 1971-1-2012 Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 1: Test with an encircling test coil on the outer surface; German version EN 1971-1:2011
DIN EN 1172-2012 Copper and copper alloys - Sheet and strip for building purposes; German version EN 1172:2011
EN 1172-2011 Copper and copper alloys - Sheet and strip for building purposes; German version EN 1172:2011
BS EN 1976-1998 Copper and copper alloys - Cast unwrought copper products
BS EN 13147-2001 Copper and copper alloys - Determination of residual stresses in the border area of a slit strip
BS EN 1652-1998 Copper and copper alloys - Plate, sheet, strip and circles for general purposes
BS 1434-1985 Specification for copper for electrical purposes: copper sections in bars, blanks and segments for commutators
BS 5624-1978 Code of practice for the lining of vessels and equipment for chemical processes: copper and copper alloys
BS EN 13347-2002 Copper and copper alloys - Rod and wire for welding and braze welding
BS EN 13604-2002 Copper and copper alloys - Products of high conductivity copper for electronic tubes, semiconductor devices and vacuum applications
BS EN 13148-2010 Copper and copper alloys. Hot-dip tinned strip
BS EN 14977-2006 Copper and copper alloys - Detection of tensile stress - 5% ammonia test
BS EN 12451-1999 Copper and copper alloys. Seamless, round tubes for heat exchangers
BS EN 1654-1998 Copper and copper alloys - Strip for springs and connectors
BS EN 12735-1-2010 Copper and copper alloys.Seamless, round coppertubes for air conditioning andrefrigeration.Part 1: Tubes for piping systems
BS DD CEN/TS 13388-2008 Copper and copper alloys - Compendium of compositions and products
BS EN 12384-1999 Copper and copper alloys - Determination of spring bending limit on strip
BS EN 13600-2002 Copper and copper alloys - Seamless copper tubes for electrical purposes
BS EN 12450-1999 Copper and copper alloys - Seamless, round copper capillary tubes
BS EN 13605-2002 Copper and copper alloys - Copper profiles and profiled wire for electrical purposes
BS EN 13601-2002 Copper and copper alloys - Copper rod, bar and wire for general electrical purposes
BS EN 12861-1999 Copper and copper alloys - Scrap
BS EN 723-2009 Copper and copper alloys - Combustion method for determination of the carbon content on the inner surface of copper tubes or fittings
BS EN 12452-1999 Copper and copper alloys - Rolled, finned, seamless tubes for heat exchangers
BS EN 1977-1998 Copper and copper alloys - Copper drawing stock (wire rod)
BS EN 13602-2002 Copper and copper alloys - Drawn, round copper wire for the manufacture of electrical conductors
BS EN 13599-2002 Copper and copper alloys - Copper plate, sheet and strip for electrical purposes
BS EN 1971-1999 Copper and copper alloys - Eddy current test for tubes
BS EN 1653-1998 Copper and copper alloys - Plate, sheet and circles for boilers, pressure vessels and hot water storage units
BS EN 12735-2-2010 Copper and copper alloys.Seamless, round coppertubes for air conditioning andrefrigeration.Part 2: Tubes for equipment
BS EN 13603-2002 Copper and copper alloys - Test methods for assessing protective tin coatings on drawn round copper wire for electrical purposes
BS EN 1982-2008 Copper and copperalloys — Ingots andcastings
EN 1976-1998 Copper and copper alloys - Cast unwrought copper products; German version EN 1976:1998
EN 12861-1999 Copper and copper alloys - Scrap; German version EN 12861:1999
EN 12451-1999 Copper and copper alloys - Seamless, round tubes for heat exchangers; German version EN 12451:1999
EN 1971-1998 Copper and copper alloys - Eddy current test for tubes; German version EN 1971:1998
EN 1978-1998 Copper and copper alloys - Copper cathodes; German version EN 1978:1998
EN 1653-2000 Copper and copper alloys - Plate, sheet and circles for boilers, pressure vessels and hot water storage units (includes amendment A1:2000); German version EN 1653:1997 + A1:2000
EN 14977-2006 Copper and copper alloys - Detection of tensile stress - 5 % ammonia test English version of DIN EN 14977:2006-09
EN 1654-1997 Copper and copper alloys - Strip for springs and connectors; German version EN 1654:1997
EN 1758-1997 Copper and copper alloys - Strip for lead frames; German version EN 1758:1997
EN 1982-2008 Copper and copper alloys - Ingots and castings; German version EN 1982:2008
EN 12420-1999 Copper and copper alloys - Forgings; German version EN 12420:1999
EN 13601-2002 Copper and copper alloys - Copper rod, bar and wire for general electrical purposes; German version EN 13601:2002
EN 13600-2002 Copper and copper alloys - Seamless copper tubes for electrical purposes; German version EN 13600:2002
EN 13147-2001 Copper and copper alloys - Determination of residual stresses in the border areas of slit strip; German version EN 13147:2001
EN 504-1999 Roofing products from metal sheet - Specification for fully supported roofing products from copper sheet; German version EN 504:1999
EN 12450-1999 Copper and copper alloys - Seamless, round copper capillary tubes; German version EN 12450:1999
EN 723-2009 Copper and copper alloys - Combustion method for determination of the carbon content on the inner surface of copper tubes or fittings; English version of DIN EN 723:2009-07
EN 14436-2004 Copper and copper alloys - Electrolytically tinned strip; German version EN 14436:2004
EN 12452-1999 Copper and copper alloys - Rolled, finned, seamless tubes for heat exchangers; German version EN 12452:1999
EN 1977-1998 Copper and copper alloys - Copper drawing stock (wire rod); German version EN 1977:1998
EN 13604-2002 Copper and copper alloys - Products of high conductivity copper for electronic tubes, semiconductor devices and vacuum applications; German version EN 13604:2002
EN 1172-1996 Copper and copper alloys - Sheet and strip for building purposes; German version EN 1172:1996
EN 13347-2002 Copper and copper alloys - Rod and wire for welding and braze welding; German version EN 13347:2002
EN 1652-1997 Copper and copper alloys - Plate, sheet, strip and circles for general purposes; German version EN 1652:1997
EN 12384-1999 Copper and copper alloys - Determination of spring bending limit on strip; German version EN 12384:1999
EN 13599-2002 Copper and copper alloys - Copper plate, sheet and strip for electrical purposes; German version EN 13599:2002
EN 13602-2002 Copper and copper alloys - Drawn, round copper wire for the manufacture of electrical conductors; German version EN 13602:2002
EN 13603-2002 Copper and copper alloys - Test methods for assessing protective tin coatings on drawn round copper wire for electrical purposes; German version EN 13603:2002
ISO 431-1981 Copper refinery shapes
ISO 197-4-1983 Copper and copper alloys; Terms and definitions; Part 4 : Castings
ISO 4739-1985 Wrought copper and copper alloy products; Selection and preparation of specimens and test pieces for mechanical testing
JIS H3250-2010 Copper and copper alloy rods and bars
JIS B2011-2010 Bronze, gate, globe, angle, and check valves
JIS H5121-2009 Copper alloy continuous castings
JIS H5120-2009 Copper and copper alloy castings
JIS H2123 AMD 1-2009 Copper billets and cakes (Amendment 1)
JIS H3300-2009 Copper and copper alloy seamless pipes and tubes
JIS H3330-2003 Plastic covered copper tubes
JIS F3059-1996 Bronze screwdown vertical storm valves
JIS F3057-1996 Bronze vertical storm valves
JIS H3510-2006 Oxygen free copper sheets, plates, strips, seamless pipes and tubes, rods, bars and wires for electron devices
JIS H3320-2006 Copper and copper alloy welded pipes and tubes
JIS H3270-2006 Copper beryllium alloy, phosphor bronze and nickel silver rods, bars and wires
JIS H3260-2006 Copper and copper alloy wires
JIS H3140-2006 Copper bus bars
JIS H3130-2006 Copper beryllium alloy, copper titanium alloy, phosphor bronze, copper-nickel-tin alloy and nickel silver sheets, plates and strips for springs
JIS H3110-2006 Phosphor bronze and nickel silver sheets, plates and strips
JIS H3100-2006 Copper and copper alloy sheets, plates and strips
JIS K2513-2000 Petroleum products -- Corrosiveness to copper -- Copper strip test
JIS H2123-1999 Copper billets and cakes
JIS H0502-1986 Method of eddy current testing for copper and copper alloy pipes and tubes
NF A51-309-2002 Copper and copper alloys - Drawn, round copper wire for the manufacture of electrical conductors.
NF A51-203-1998 Copper and copper alloys - Strip for springs and connectors.
NF A51-201-1998 Copper and copper alloys - Plate, sheet, strip and circles for general purposes.
NF R99-090-1980 Circular section tubes of non ferrous metals and alloys. Recommended dimensions.
NF A51-102-1999 Copper and copper alloys. Seamless, round tubes for heat exchangers.
NF A05-110-2001 Copper and copper alloys - Determination of residual stresses in the border area of slit strip.
NF A53-704-1998 Copper cathodes. Copper and copper alloys.
NF A05-113-2009 Copper and copper alloys - Combustion method for determination of the carbon content on the inner surface of copper tubes or fittings.
NF A51-110-2006 Copper and copper alloys - Detection of tensile stress - 5 % ammonia test.
NF A53-705-2008 Copper and copper alloys - Ingots and castings.
NF A51-111-2002 Copper and copper alloys - Test methods for assessing protective tin coatings on drawn round copper wire for electrical purposes.
NF A51-308-2002 Copper and copper alloys - Copper rod, bar and wire for general electrical purposes.
NF A51-129-1999 Copper and copper alloys - Rolled, finned seamless tubes for heat exchangers.
NF A51-600-1999 Copper and copper alloys. Scrap.
NF A53-706-1998 Copper and copper alloys - Cast unwrought copper products.
NF A05-115-1999 Copper and copper alloys. Eddy current test for tubes.
NF A51-120/IN1-2010 Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications.
NF A51-306-2011 Copper and copper alloys - Hollow rod for free machining purposes.
NF A51-305-2011 Copper and copper alloys - Profiles and bars for general purposes.
NF A51-304-2011 Copper and copper alloys - Wire for general purposes.
NF A51-303-2011 Copper and copper alloys - Wrought and unwrought forging stock.
NF A51-302-2011 Copper and copper alloys - Rod for free machining purposes.
NF A51-301-2011 Copper and copper alloys - Rod for general purposes.
NF A51-205-2011 Copper and copper alloys - Hot-dip tinned strip.
JIS B2011 AMD 1-2011 Bronze, gate, globe, angle, and check valves (Amendment 1)
EN 13148-2010 Copper and copper alloys - Hot-dip tinned strip; German version EN 13148:2010
EN 12168-2011 Copper and copper alloys - Hollow rod for free machining purposes; German version EN 12168:2011
EN 12167-2011 Copper and copper alloys - Profiles and bars for general purposes; German version EN 12167:2011
EN 12166-2011 Copper and copper alloys - Wire for general purposes; German version EN 12166:2011
EN 12165-2011 Copper and copper alloys - Wrought and unwrought forging stock; German version EN 12165:2011
EN 12164-2011 Copper and copper alloys - Rod for free machining purposes; German version EN 12164:2011
EN 12163-2011 Copper and copper alloys - Rod for general purposes; German version EN 12163:2011
DIN EN 12168-2011 Copper and copper alloys - Hollow rod for free machining purposes; German version EN 12168:2011
DIN EN 12167-2011 Copper and copper alloys - Profiles and bars for general purposes; German version EN 12167:2011
DIN EN 12166-2011 Copper and copper alloys - Wire for general purposes; German version EN 12166:2011
DIN EN 12165-2011 Copper and copper alloys - Wrought and unwrought forging stock; German version EN 12165:2011
DIN EN 12164-2011 Copper and copper alloys - Rod for free machining purposes; German version EN 12164:2011
DIN EN 12163-2011 Copper and copper alloys - Rod for general purposes; German version EN 12163:2011
D2861-1998 Test Methods for Flexible Composites of Copper Foil with Dielectric Film or Treated Fabrics
D2861-1987(2009) Standard Test Methods for Flexible Composites of Copper Foil with Dielectric Film or Treated Fabrics
BS EN 12168-2011 Copper and copper alloys. Hollow rod for free machining purposes
BS EN 12167-2011 Copper and copper alloys. Profiles and bars for general purposes
BS EN 12166-2011 Copper and copper alloys. Wire for general purposes
BS EN 12165-2011 Copper and copper alloys. Wrought and unwrought forging stock
BS EN 12164-2011 Copper and copper alloys. Rod for free machining purposes
BS EN 12163-2011 Copper and copper alloys. Rod for general purposes
B468-1999 Specification for Welded UNS N08020, UNS N08024, and UNS N08026 Alloy Tubes
B464-1999 Specification for Welded UNS N08020, UNS N08024, and UNS N08026 Alloy Pipe
B372-2011 Standard Specification for Seamless Copper and Copper-Alloy Rectangular Waveguide Tube
DIN EN 723-2009 Copper and copper alloys - Combustion method for determination of the carbon content on the inner surface of copper tubes or fittings; English version of DIN EN 723:2009-07
DIN EN 504-2000 Roofing products from metal sheet - Specification for fully supported roofing products from copper sheet; German version EN 504:1999
DIN EN 1982-2008 Copper and copper alloys - Ingots and castings; German version EN 1982:2008
DIN EN 1978-1998 Copper and copper alloys - Copper cathodes; German version EN 1978:1998
DIN EN 1977-1998 Copper and copper alloys - Copper drawing stock (wire rod); German version EN 1977:1998
DIN EN 1976-1998 Copper and copper alloys - Cast unwrought copper products; German version EN 1976:1998
DIN EN 1971-1998 Copper and copper alloys - Eddy current test for tubes; German version EN 1971:1998
DIN EN 1758-1998 Copper and copper alloys - Strip for lead frames; German version EN 1758:1997
DIN EN 1654-1998 Copper and copper alloys - Strip for springs and connectors; German version EN 1654:1997
DIN EN 1653-2000 Copper and copper alloys - Plate, sheet and circles for boilers, pressure vessels and hot water storage units (includes amendment A1:2000); German version EN 1653:1997 + A1:2000
DIN EN 1652-1998 Copper and copper alloys - Plate, sheet, strip and circles for general purposes; German version EN 1652:1997
DIN EN 14977-2006 Copper and copper alloys - Detection of tensile stress - 5 % ammonia test English version of DIN EN 14977:2006-09
DIN EN 14436-2004 Copper and copper alloys - Electrolytically tinned strip; German version EN 14436:2004
DIN EN 13605 Corrigendum 1-2005 Copper and copper alloys - Copper profiles and profiled wire for electrical purposes Corrigendum 1 to English version of DIN EN 13605:2002-10
DIN EN 13605 Berichtigung 1-2005 Corrigenda to DIN EN 13605:2002-10
DIN EN 13604-2002 Copper and copper alloys - Products of high conductivity copper for electronic tubes, semiconductor devices and vacuum applications; German version EN 13604:2002
DIN EN 13603-2002 Copper and copper alloys - Test methods for assessing protective tin coatings on drawn round copper wire for electrical purposes; German version EN 13603:2002
DIN EN 13602-2002 Copper and copper alloys - Drawn, round copper wire for the manufacture of electrical conductors; German version EN 13602:2002
DIN EN 13601-2002 Copper and copper alloys - Copper rod, bar and wire for general electrical purposes; German version EN 13601:2002
DIN EN 13600-2002 Copper and copper alloys - Seamless copper tubes for electrical purposes; German version EN 13600:2002
DIN EN 13599-2002 Copper and copper alloys - Copper plate, sheet and strip for electrical purposes; German version EN 13599:2002
DIN EN 13347-2003 Copper and copper alloys - Rod and wire for welding and braze welding; German version EN 13347:2002
DIN EN 13148-2010 Copper and copper alloys - Hot-dip tinned strip; German version EN 13148:2010
DIN EN 13147-2001 Copper and copper alloys - Determination of residual stresses in the border areas of slit strip; German version EN 13147:2001
DIN EN 12861-1999 Copper and copper alloys - Scrap; German version EN 12861:1999
DIN EN 12452-1999 Copper and copper alloys - Rolled, finned, seamless tubes for heat exchangers; German version EN 12452:1999
DIN EN 12451-1999 Copper and copper alloys - Seamless, round tubes for heat exchangers; German version EN 12451:1999
DIN EN 12450-1999 Copper and copper alloys - Seamless, round copper capillary tubes; German version EN 12450:1999
DIN EN 12420-1999 Copper and copper alloys - Forgings; German version EN 12420:1999
DIN EN 12384-1999 Copper and copper alloys - Determination of spring bending limit on strip; German version EN 12384:1999
DIN EN 12168-2000 Copper and copper alloys - Hollow rod for free machining purposes (includes amendment A1:2000); German version EN 12168:1998 + A1:2000
DIN EN 12167-1998 Copper and copper alloys - Profiles and rectangular bars for general purposes; German version EN 12167:1998
DIN EN 12166-1998 Copper and copper alloys - Wire for general purposes; German version EN 12166:1998
DIN EN 12165-1998 Copper and copper alloys - Wrought and unwrought forging stock; German version EN 12165:1998
DIN EN 12164-2000 Copper and copper alloys - Rod for free machining purposes (includes amendment A1:2000); German version EN 12164:1998 + A1:2000
DIN EN 12163-1998 Copper and copper alloys - Rod for general purposes; German version EN 12163:1998
DIN EN 1172-1996 Copper and copper alloys - Sheet and strip for building purposes; German version EN 1172:1996
DIN CEN/TS 13388-2008 Copper and copper alloys - Compendium of compositions and products; German version CEN/TS 13388:2008
BS EN 504-2000 Roofing products from metal sheet - Specification for fully supported roofing products of copper sheet
BS EN 1978-1998 Copper and copper alloys - Copper cathodes
BS EN 1758-1998 Copper and copper alloys - Strip for lead frames
BS EN 14436-2004 Copper and copper alloys - Electrolytically tinned strip
BS EN 12420-1999 Copper and copper alloys - Forgings
BS EN 12168-1998 Copper and copper alloys - Hollow rod for free machining purposes
BS EN 12166-1998 Copper and copper alloys - Wire for general purposes
BS EN 12165-1998 Copper and copper alloys - Wrought and unwrought forging stock
BS EN 1172-1997 Copper and copper alloys - Sheet and strip for building purposes
BS 3839-1978 Specification for oxygen-free high-conductivity copper for electronic tubes and semiconductor devices
NF P41-221-1-2-2008 Building works - Copper piping - Supply of hot and cold domestic water, drainage of waste water, rainwater, air conditionning installations - Part 1-2 : general criteria for selection of materials.
NF P41-221-1-1-2008 Building works - Copper piping - Supply of hot and cold domestic water, drainage of waste water, rainwater, air conditionning installations - Part 1-1 : contract bill technical clauses.
NF P34-305-2000 Roofing products from metal sheet - Specification for fully supported roofing products of copper sheet.
NF C30-010-1930 Conductors. Standard annealed copper : specification.
NF A53-715-2002 Foundry products - Copper-nickel-zinc alloy and nickel-copper castings - Characteristics.
NF A51-700-1999 Copper and copper alloys. Forgings.
NF A51-430-1996 Copper and copper alloys. Sheet and strip for building purposes.
NF A51-311-2002 Copper and copper alloys - Copper profiles and profiled wire for electrical purposes.
NF A51-310-2002 Copper and copper alloys - Products of high conductivity copper for electronic tubes, semiconductor devices and vacuum applications.
NF A51-307-2003 Copper and copper alloys - Rod and wire for welding and braze welding.
NF A51-306-1998 Copper and copper alloys - Hollow rod for free machining purposes.
NF A51-303-1998 Copper and copper alloys - Wrought and unwrought forging stock.
NF A51-302-1998 Copper and copper alloys - Rod for free machining purposes.
NF A51-301-1998 Copper and copper alloys - Rod for general purposes.
NF A51-206-2004 Copper and copper alloys - Electrolytically tinned strip.
NF A51-205-2002 Copper and copper alloys - Hot-dip tinned strip.
NF A51-204-1998 Copper and copper alloys - Strip for lead frames.
NF A51-202-1998 Copper and copper alloys. Plate, sheet and circles for boilers, pressure vessels and hot water storage units.
NF A51-202/A1-2000 Copper and copper alloys - Plate, sheet and circles for boilers, pressure vessels, and hot water storage units.
NF A51-200-2002 Copper and copper alloys - Copper plate, sheet and strip for electrical purposes.
NF A51-128-2002 Copper and copper alloys - Seamless copper tubes for electrical purposes.
NF A51-118-1998 Copper and copper alloys - Copper drawing stock (wire rod).
NF A51-103-1999 Copper and copper alloys. Seamless, round copper capillary tubes.
NF A51-090-1999 Copper and copper alloys. Determination of spring bending limit on strip.
NF A01-111-1986 Copper and copper alloys. General technical requirements of supply of semi-finished products.
ANSI/UL 60947-7-2-2004 Standard for Protective Conductor Terminal Blocks for Copper Conductors
ANSI/UL 60947-7-1-2004 Standard for Terminal Blocks for Copper Conductors
ANSI/ASME B16.26-2006 Cast Copper Alloy Fittings for Flared Copper Tubes
YS/T 615-2006 Copper rods and bars for electrical purposes
YS/T 583-2006 Brass rods and bars for forging plumbing fittings
YS/T 499-2006 Atomized copper powder
YS/T 471-2004 Copper and copper alloys webster hardness standrad test method
YS/T 463-2003(2009) Defects of plate, strip and foil products of copper and copper alloy
YS/T 462-2003(2009) Defects of tube, bar, shape and wire products of copper and copper alloy
YS/T 451-2002(2009) Poly-lag copper tube
YS/T 450-2002(2009) Cleanness copper tube for refrigerator industry
YS/T 440-2001 Inner grooved copper tube
YS/T 334-1995 Copper-beryllium alloy rod
YS/T 323-2002(2009) Beryllium bronze sheets and strips
YS/T 289-1994 Al Sn 20 Cu alloy and steel backing bimetal plate
YS/T 283-1994 Copper master alloy ingots
YS/T 583-2006 Brass rods and bars for forging plumbing fittings